She8er55uc Parts

The Holder is an OEM component specifically designed for select Bosch dishwashers. Located inside the lower rack, it secures serving utensils during washing to prevent accidental damage. 

Through precision engineering, the holder maintains a safe yet flexibly adjustable design. This allows tool placement in multiple orientations, maximizing utility based on the specific items being washed. Its stability ensures forks, spoons, and spatulas remain neatly stored away from spinning arms below.

Causes of a bad holder can include warping and bending due to wear over time or utensils placed beyond weight limits. Potential holder damage risks impeding cleaning performance or snagging on rack components. 

Symptoms of a bad holder include:

• Loose or unstable connection points inside the rack 
• Inability to properly secure utensils during wash cycles
• Utensils jamming or scraping the bottom of the tub

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace to restore organized utensil storage and protection.
 

The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.

A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.

Symptoms of a bad sealing include:

• Water or moisture around the control panel
• Visible cracks or gaps in the sealing
• A loose or ill-fitting seal

Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Leveling Foot is an OEM part for Bosch dishwashers. It is designed to provide stability by allowing you to adjust the height of the dishwasher, ensuring it is level on uneven flooring.

Causes of a bad leveling foot can include wear and tear over time, damage from excessive force or impact, or thread stripping from frequent adjustments.

Symptoms of a bad leveling foot include:

• The dishwasher rocking or wobbling during operation
• Difficulty in achieving a level position
• Increased noise or vibration when the dishwasher is running

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Float Housing is an OEM part for Bosch dishwashers. It is the part that houses the float assembly, which is responsible for detecting the water level inside the dishwasher tub during operation.

Causes of a malfunctioning or damaged Float Housing can range from debris or mineral buildup preventing proper float movement, to cracks or breaks in the housing itself due to age, heat exposure, or impact.  

Symptoms of a bad Float Housing can include:

• Water leaks or flooding from the dishwasher
• The dishwasher not filling with water or overfilling
• Error codes related to water level sensing issues
• The float itself getting stuck or failing to move freely within the housing

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This kit replaces the sliding rails that support and guide the upper dishrack, restoring smooth, level movement so the rack doesn't bind, tip, or drop during loading and unloading.

• Guides the upper rack in and out along the tub sidewalls
• Helps correct a sticking, uneven, or hard-to-slide upper rack
• Can reduce issues like a sagging rack or difficulty engaging rack stops
• Wear from age, heavy loads, or corrosion can require replacement

• Disconnect power and shut off water before servicing
• Remove the upper rack and stops to access and swap the rails
• Transfer any hardware from the old rails
• Test rack travel and ensure stops are secure before restoring power

The Control Unit Dishwasher is an OEM component specially designed for premium Bosch dishwashers. It monitors cycles, temperatures, and water levels through precise digital controls and sensors. The control unit enables customized performance to suit any load with advanced settings for specialty items too.

Causes of failure can include liquid intrusion inducing shorts over time. Physical drops or impacts may also crack circuits or connections within.

Symptoms include: 

• Inability to precisely regulate cycles as wash conditions change
• Faulty gauges of soil levels, temperatures, and run times  
• Non-responsiveness of cycle or option buttons
• Draining, heating, and motorized malfunctions

Replacing with this genuine Bosch control unit restores customized functionality. Compatible with Miele, Asko, and Thermador models, optimization with an OEM component keeps dishes sparkling for years to come.
 

The Cutlery Drawer is an OEM component specifically designed for select Bosch dishwashers featuring third rack add-on compartments. This dedicated caddy optimizes silverware cleaning through specialized spray targeting.

Multi-level silverware baskets keep like items grouped to expose all surfaces and edges to optimal washing coverage. Durable slides facilitate smooth extension and retraction for easy loading and unloading. 

Symptoms signaling the need for a replacement cutlery drawer include:

• Missing or broken basket dividers allowing commingling
• Gummy or sticky drawer glides from food remains to obstruct movement  
• Cracks or holes exposing silverware to direct heating elements

Causes may stem from sharp objects puncturing divider walls or sustained high temperatures weakening plastics over decades. Regular cleaning helps prolong a useful lifetime.

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and select Kenmore dishwashers configured with triple racks for luxurious silverware hygiene.
 

The Cover is an OEM part for Bosch dishwashers. Designed to securely seal the sump area, this part prevents leaks and ensures that water is properly circulated and drained during the dishwashing cycle. 

Causes of failure might include physical damage such as cracks or warping, which can compromise the seal, or the buildup of debris that prevents proper seating of the cover. 

Symptoms of a failing Cover include:

• Water leaks from the bottom of the dishwasher
• Poor washing performance due to inadequate water circulation
• Unusual noises as the pump struggles to draw or expel water
• Visible damage or warping of the cover itself

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Wire Harness is an OEM component specifically designed for select Bosch dishwashers requiring electrical connections between moving components. It facilitates signal and current pathways throughout appliance frames.

Reinforced flexing sections bend without kinks accommodating shifting door movements. While connector joints remain snug against jostling. This daisy chain design simplifies diagnostics and maintenance procedures compared to individual wiring. 

Symptoms signaling the need for a new harness include:

• Intermittent cycle malfunctions indicating loose or corroded connections  
• Broken or cracked housing exposing live conductors to shorting hazards
• Overly taut sections hindering the intended range of component motions

Causes relate to prolonged abrasion stresses and water damage compromising insulation throughout thousands of cycles. Physical damage during repairs may require a complete replacement of this integral wiring backbone.

This OEM Bosch replacement harness is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on consistent control schemes. Reinstallation restores reliable electrical pathways.
 

This inner door panel forms the inside surface of the dishwasher door. It supports key door components and helps seal the tub, keeping water and heat contained for reliable, quiet operation.

• Provides the structural interior panel of the door
• Mounts the detergent dispenser, latch, and vent components
• Works with the door gasket to contain water and steam
• Typical symptoms include dents/rust, leaks at the door area, or a loose/misaligned dispenser or latch

• Disconnect electrical power and turn off the water supply before starting
• Open the door, support the outer panel, and remove perimeter screws to separate the door halves
• Transfer the dispenser, latch/lock, vent, wiring, and insulation from the old panel to the new one; reuse hardware and seals if in good condition
• Ensure the door gasket seats evenly; after reassembly, run a short test cycle and check for leaks

The Outer Door is an OEM part for Bosch dishwashers. Composed of durable stainless steel, it withstands cleaning chemicals while protecting the internal components. 

Symptoms of a bad outer door include:

• Dents, scratches, or rusting affecting the appearance   
• Leaks or moisture ingress from a compromised seal
• Looseness, sagging, or improper alignment
• Broken or missing handle/latch components

Causes of failure could include normal wear over time from daily use. Accidental dents from cookware or impact damage could also affect performance. 

Replacing with this OEM Bosch outer door restores protective function. Compatible with 300/500 freestanding and built-in models, its premium materials meet quality standards. This OEM Bosch part can also be used on Thermador and Gaggenau appliances.
 

This replacement hose channels water between assemblies inside your appliance to keep cycles running smoothly and leak-free. Replacing a brittle, cracked, or leaking hose restores proper water flow and helps prevent puddles or water damage.

• Routes water between internal components during operation
• Maintains a sealed path to help prevent leaks
• Common failure symptoms: visible cracks or kinks, water leaking, standing water, or moisture under the unit
• Restores proper water flow when the original hose is worn, swollen, or loose at the fittings

• Disconnect power and turn off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note routing and clamp positions; transfer existing clamps/seals if applicable
• Fully seat connections and tighten clamps; run a test cycle and check for leaks

The Holder is an OEM part for Bosch dishwashers. It secures and positions the dish rack inserts within the dishwasher rack, ensuring proper alignment and stability during the washing cycles.

This holder is designed to withstand the rigors of repeated dishwashing cycles, helping to maintain the integrity of the inserts and prevent them from shifting or becoming dislodged. 

Causes of a bad holder can include wear and tear over time, exposure to excessive heat or moisture, or physical impact that may cause deformation or cracking.

Symptoms of a bad holder include:

• Inserts becoming loose or misaligned
• Excessive noise or rattling during wash cycles
• Potential damage to dishes due to rack instability

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Holder is an OEM component specifically designed for Bosch dishwashers. It secures serveware and accessories safely inside the tub during wash cycles. Flexible yet durable prongs provide adjustable containment for maximum loading efficiency.

Causes of a bad holder can include normal wear and tear until prongs warp or weaken, inhibiting proper holding. Damage from loading large pots may also cause replacement needs.

Symptoms of a bad holder include:

• Serveware that shifts or falls during washing, resulting in noisy cycles  
• Containment prongs that are loose, misshapen, or cracked from use
• Reduced loading capacity

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours to optimize organization and minimize breakage during every wash.
 

The Detergent Dispenser Seal is an OEM part for Bosch dishwashers. Located inside the detergent dispenser compartment, it creates a water-tight barrier, preventing premature detergent dissolution and leaks. Working seamlessly with the dispenser system, the seal facilitates controlled detergent release for optimum cleaning performance cycle after cycle. 

Causes for a bad detergent dispenser seal can include wear and tear from repeated use, deformations due to temperature fluctuations, and cracks or splits from general use.  

Symptoms of a bad detergent dispenser seal include:

• Detergent residue or puddles inside the dishwasher  
• Premature detergent dissolution before the main wash
• Leaks or drips from the dispenser area when closed
• Ineffective or inconsistent cleaning ability

This genuine Bosch detergent dispenser seal replacement will restore its water-tight barrier. It is also compatible with some Thermador, Siemens, and select Kenmore models.

The Sump is an OEM part for Bosch dishwashers. It is located at the bottom of the dishwasher's tub, responsible for filtering and recirculating water during the wash cycle. The sump is designed to collect and filter out food particles and debris from the water, ensuring that only clean water is circulated throughout the dishwasher. It also houses the circulation pump, which propels the water through the spray arms to effectively clean your dishes.

A bad sump can occur due to clogs, damage, or wear and tear over time. Signs of a faulty sump include poor cleaning performance, water not draining properly, or unusual noises during operation.

Symptoms of a bad sump include:

• Food particles or residue left on dishes
• Water not draining properly 
• Unusual noises during operation

Replace your faulty dishwasher sump with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.