T181f800sp05 Parts

This defrost heater melts frost buildup on the evaporator to help restore normal airflow and cooling performance. It's a direct-replacement-style heater used in frost-free refrigerators to prevent ice buildup. What it does:

• Warms the evaporator coil during the defrost cycle to remove frost and ice.
• Helps maintain proper cold-air circulation by preventing ice obstruction.
• Can resolve symptoms like excessive frost on the evaporator, reduced cooling, or frequent run cycles associated with frost buildup.
• Works with the refrigerator's defrost thermostat/timer/control to perform periodic defrosts.

• One defrost heater (single heater element as shown)

• High-level replacement: disconnect power before servicing, drain/defrost appliance if necessary, and follow OEM disassembly steps for access to the evaporator compartment.
• Verify heater routing and mounting are correct and that the defrost thermostat/thermistor and control are functioning before final reassembly.

This valve-magnet is the solenoid valve used to control water or fluid flow in compatible appliances, restoring proper valve operation so the unit fills and dispenses when commanded. Durable replacement matching OEM form and function. What it does:

• Acts as the electromechanical valve that opens and closes to allow water or fluid into the appliance
• Restores proper fill, dispense, or circulation when a failed valve causes no-fill, intermittent fill, or weak flow
• Engages when the appliance controller sends an electrical signal to operate the valve
• Commonly used where precise on/off fluid control is required

• One valve-magnet (solenoid valve) as pictured

• Disconnect power and water before attempting replacement to avoid shock or flooding
• Verify orientation and electrical connector fit; do not force connections
• Inspect valve inlet/outlet fittings and replace seals or gaskets if damaged

This control panel is the front console assembly that houses the dishwasher's buttons and display, restoring a working user interface so you can select cycles and see status information clearly. What it does

• Replaces a cracked, faded, or unresponsive front console so buttons and display operate properly
• Restores touch/press responsiveness for cycle selection and option buttons
• Helps resolve symptoms such as unresponsive controls, missing button labels, or intermittent display behavior
• Provides the visible user interface and mounting surface for control components

• Disconnect power (unplug or shut off breaker) before starting any repair to avoid shock
• Basic disassembly of the dishwasher door may be required; handle glass and trim carefully to avoid damage
• Keep track of screws and clips; test the panel operation before reassembling fully

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

The FIXTURE is an OEM component specifically designed for Bosch refrigerators. Typically located inside the fresh food compartment, fixtures hold slidable wire shelves, bins, crispers, and other removable storage accessories in precise positions.

Causes of a faulty fixture can include cracking or breaking of plastic rails from repeated impact or overloading. Clips and mounting attachments may also loosen over time.

Symptoms of a bad fixture include: 

• Shelves, bins, and pans that no longer slide smoothly or feel insecure
• Storage accessories like crispers that tilt or are difficult to remove
• Interior rattles or banging noises coming from loose components

This replacement Bosch fixture returns stability and structure to the organization system. Realigning fixtures maintains consistent placement and secure engagement of accessories for tidy, accessible food storage. 

Compatible with Thermador, Gaggenau, or Kenmore French door models utilizing consistent interiors.

Replacement heating element that warms dishwasher wash water and aids drying so your dishes come out cleaner and drier. Designed to replace a failed or damaged tub heater and restore proper wash temperatures and drying performance. What it does:

• Heats incoming wash water so detergents work effectively and soils are removed.
• Helps evaporate remaining water during the drain/dry cycle to improve drying results.
• Commonly needed when dishes are still cold, not cleaning well, or the dryer cycle leaves water spots.
• Restores proper temperature control when the original element is burned out, visibly damaged, or open.

• Disconnect power to the appliance before attempting any repairs to avoid shock.
• Inspect wiring and mounting hardware for damage; replace any corroded connectors.
• Basic mechanical skills recommended.
• Do not operate the appliance with exposed terminals or damaged insulation.

This operating module is the dishwasher's electronic control board that interprets user inputs and manages cycle functions, restoring responsive controls and proper cycle sequencing when the original module fails. What it does:

• Receives touchpad or button commands and runs the selected wash cycles
• Controls timers, valve/relay signals, and cycle sequencing for normal operation
• Can cause unresponsive controls, incorrect cycles, or failure to start when faulty
• Works with the front control assembly to relay status and error feedback

• One operating module (electronic control board)

• Disconnect power before service to avoid electrical shock
• Handle the board by edges and avoid static discharge; wear an ESD strap if available
• Minor disassembly of the control panel or door is typically required; follow the OEM service manual

Replacement reel assembly designed to restore smooth winding and secure routing for a reel-based component in select Bosch appliances. Use this reel to replace worn or damaged reels and reduce snagging, rubbing, or loose routing. What it does:

• Winds and stores a cable, hose, or internal component to keep movement controlled and organized
• Restores smooth retraction/extension and reduces rubbing or binding
• Helps eliminate rattling or loose parts caused by a broken or worn reel
• Supports correct routing to prevent pinched wiring or hoses

• Disconnect power and water before beginning any repair
• Follow OEM instructions for disassembly and reel replacement
• Inspect mounting points and fasteners; replace any damaged clips or screws before reassembly
• Test the reel's movement and check for proper routing before returning the appliance to service

This replacement control panel push button restores a missing, worn, or broken button on compatible Bosch appliance control panels. It gives a clean, user-friendly surface for reliably activating the associated function. What it does

• Replaces a damaged or missing control panel push button so the corresponding command can be selected.
• Restores a crisp tactile feel for a more reliable button press.
• Helps resolve symptoms like a loose, cracked, jammed, or visually missing button.
• Matches the original form for proper fit and operation when installed correctly.

• One replacement control panel push button.

• Disconnect power to the appliance before starting any work.
• Typically snap-fits or slides into the front control panel; use a non-marring pry tool if needed.
• Remove gently to avoid damaging the control panel or surrounding buttons; note orientation for reinstallation.

This valve magnet is the solenoid coil used to actuate a dishwasher water/valve assembly, converting electrical control signals into mechanical valve movement for water flow control. It helps restore proper fill and drain sequencing. What it does:

• Energizes the valve assembly so the appliance can open or close water flow when commanded
• Restores valve actuation if the coil has failed or is not generating magnetic pull
• Commonly linked to symptoms like no water fill, intermittent filling, or valve that won't actuate
• Works as the electromagnetic component of the inlet/servo valve system

• Disconnect power and water supply before accessing or replacing the valve magnet
• Observe correct coil orientation and connector seating during reassembly

This water inlet valve controls water flow into the appliance, restoring proper fill and preventing unwanted leaks. Replacing a faulty inlet valve returns normal water supply and helps the appliance fill reliably. What it does:

• Opens and closes the water supply to the appliance when a cycle calls for water
• Stops water flow when the fill is complete to prevent overfilling
• Common symptom: appliance won't fill or fills slowly
• Common symptom: continuous or intermittent leaking near the inlet area
• Works with the appliance's control signals to regulate fill volume

• Disconnect power and shut off the water supply before starting any repair
• Drain residual water from hoses and fittings to avoid spills
• Inspect and replace any worn inlet hoses or seals when replacing the valve

This fixture is a small mounting clamp that secures internal components in place to keep them aligned and stable during normal appliance operation. It helps reduce movement and vibration for a quieter, more reliable appliance. What it does:

• Holds internal assemblies or wiring harnesses securely to prevent shifting
• Keeps parts properly positioned to maintain function and reduce wear
• Helps reduce rattling or vibration caused by loose components
• Supports safe, consistent operation by keeping components from contacting other parts

• Disconnect power and water supply before accessing internal components
• Basic hand tools may be required to remove panels and fasten the fixture
• Inspect surrounding clips and fasteners; replace any that are damaged

This retaining clip secures small appliance panels and components to their mounting points, helping keep parts aligned and preventing rattles or loose fittings. A simple replacement to restore proper fit and reduce noise. What it does:

• Holds trim, panels, or wiring harnesses in place at designated mounting points
• Prevents parts from shifting, reducing rattling or intermittent contact
• Restores original alignment where a bent or broken clip caused loose fit
• Works as a direct-fit replacement for the corresponding factory clip

• Turn off power and unplug the appliance before starting any repair
• Access may require removing adjacent panels or trim; keep fasteners organized
• Use pliers or a screwdriver as needed to remove the old clip and snap the new clip into place
• Check surrounding mounting surfaces for deformation before installing