Wt7300cw Parts

The Clutch Coupling & Housing Assembly is an OEM component for LG front-loading washers. This assembly contains the clutch coupling that links the motor to the drive components to rotate the washing drum. 

Symptoms of a bad clutch coupling include:

• The washing machine fails to agitate or spin clothes  
• Grinding or clanking noises occur during cycles
• The drum does not turn properly or feels obstructed
• Excessive vibration when spinning 

Causes of failure can be wear and tear over time, damage from loads that are too heavy or unbalanced, or debris buildup inside the housing.

Replace yours today with this genuine OEM LG assembly to restore optimal operation and prevent further wear. This replacement part is compatible with some Samsung, Frigidaire, and Kenmore models.

The Lid Switch Assembly is an OEM component specifically designed for LG washers. This assembly includes the lid switch, which plays an important safety role by detecting when the washer lid is properly closed and locked. 

The lid switch assembly monitors the position of the washer lid and communicates with the control board to prevent operation if the lid is detected as open. It ensures the wash cycle only functions when the lid is securely shut, minimizing safety hazards.

Symptoms of a bad lid switch include:

• The washer fails to detect when the lid is closed
• Inability to select or start a cycle 
• Error codes related to the lid being open

Replacing the lid switch with this genuine OEM LG part can restore proper safety functions to your washer. This replacement part is also compatible with Sears/Kenmore models.

This cover cap is a small trim piece that snaps into place to protect and conceal fasteners and internal components, restoring the appliance's finished appearance. It prevents dirt entry and helps keep surrounding parts secure. What it does:

• Covers exposed screws and openings to improve cosmetics
• Protects underlying components from dust and debris
• Helps keep trim and panels aligned when installed
• Commonly replaced when cracked, broken, or missing

• One cover cap

• Disconnect power (and water if applicable) before servicing the appliance
• Typically installs by snapping into position; lightweight trim may require a small flat screwdriver to remove old piece
• Inspect surrounding clips/tabs for damage and replace if worn to ensure a secure fit
• Handle plastic parts gently to avoid cracking during install

This suspension assembly supports the washer tub and helps stabilize the drum during fill and spin cycles, reducing excessive movement and noise. It restores proper alignment so the washer runs more quietly and evenly. What it does:

• Dampens tub movement and absorbs vibration during agitation and spin
• Keeps the tub centered to prevent rubbing, banging, or rocking
• Helps reduce unusual noises and wear caused by an unbalanced load
• Works with the machine's suspension points and mounts to maintain smooth operation

• One suspension assembly

• Disconnect power and water supply before beginning service
• Support the tub or drum to prevent sudden movement when removing the old assembly
• Remove the appropriate access panels and follow the OEM diagram for mounting locations and fastener torque
• Inspect adjacent mounts, springs and shocks for wear and replace if necessary

This top cover replaces a damaged or worn top panel to restore a clean, secure finish and protect internal components. It fits over the appliance frame and provides the mounting surface for control consoles and trim. What it does

• Covers and protects internal components from dust, debris and accidental contact
• Provides the correct mounting surface and alignment for control panels and trim pieces
• Restores cosmetic appearance when the existing top is dented, cracked or warped
• Helps prevent small items from falling into the cabinet through the top opening

• One top cover

• Disconnect power (and water if applicable) before beginning any work to avoid shock or injury
• Typical installation requires removing the control console or rear access panel to release mounting screws or clips
• Handle carefully to avoid scratching the painted surface; use appropriate fasteners and torque to avoid stripping

This Cabinet Base Assembly is the lower outer panel that supports and finishes the bottom of the appliance cabinet; it restores structural support and a finished appearance to the appliance exterior. Fits as the factory replacement outer base. What it does:

• Replaces a cracked, dented or missing lower cabinet panel that can affect stability and appearance.
• Restores the mounting surface and alignment for kickplate, rollers and lower cabinet components.
• Helps prevent debris and moisture from entering the cabinet underside.
• Useful when the existing base is bent, corroded or broken and causing noise or uneven cabinet sit.

• Installation requires removing the kickplate and disconnecting any trim fasteners; have basic hand tools ready.
• Lift and support the cabinet front as needed to align mounting tabs—do not force parts into place.
• Keep electrical supply disconnected and remove stored items before starting work.
• If fasteners or clips are damaged, replace them with factory parts for secure fit.

The Stator Assembly is an OEM part for LG washing machines. The stator generates electromagnetic power to turn the drum at appropriate speeds during each cycle stage.

Causes of a bad stator include cracked or degraded insulation over time allowing current leakage. This prevents stable drum rotation and consistent cycles.

Symptoms of a faulty stator involve:

• Drum failing to turn or move during the wash cycle
• Abnormal noises coming from the drive motor area
• Inability to advance cycles normally through settings

This OEM LG part is also compatible with some Kenmore models.

A standard replacement bolt used to secure appliance panels and internal assemblies. This OEM-style fastener restores proper fit and reduces movement that can cause noise or misalignment in appliance components. What it does:

• Fastens panels, brackets, and components to maintain structural integrity
• Keeps moving parts aligned to help prevent rattling or vibration
• Replaces missing, loose, or corroded bolts that compromise fit
• Suitable where a standard machine/sheet-metal bolt is required

• One bolt

• Disconnect power and water before servicing the appliance
• Use the correct driver/socket to avoid stripping the head or threads
• Tighten securely but avoid over-torquing; replace any damaged nuts or washers
• Inspect mating threads and clean or chase threads if corroded

This softener cap seals and directs fabric softener from the dispenser so it dispenses correctly during the wash cycle. Replacing a worn or cracked cap helps prevent leaks and ensures the softener flows into the drum at the right time. What it does:

• Seals the fabric softener reservoir to prevent drips and leaks during filling and storage
• Guides softener into the rinse cycle so the appliance dispenses at the proper time
• Replaces cracked, warped, or missing caps that cause leaking or improper dispensing
• Restores a secure fit between the dispenser assembly and the softener reservoir

• One softener cap

• Unplug the appliance or disconnect power before servicing
• Remove the dispenser drawer or housing to access the cap
• Press or snap the cap into place until fully seated; do not force or overtighten
• Inspect dispenser for residue or damage and clean before reinstalling