Zbd1870nss Parts

This connecting ring nut secures a threaded water-path connection inside the dishwasher, helping keep the joint tight and leak-resistant. Replace a cracked, stripped, or missing nut to restore a secure fit and reliable operation.

• Tightens and holds a mating connector, tube, or manifold in place
• Helps maintain a watertight connection when used with the proper seal
• Replaces worn or cross-threaded hardware that can cause leaks or loose joints
• Typical symptoms include dripping at the connection, a loose hose/manifold, or difficulty keeping the fitting tight

• Disconnect power and shut off the water supply before servicing
• Access the joint; start threads by hand to avoid cross-threading, then snug with the proper tool—do not overtighten
• Inspect any O-ring or gasket at the connection and replace if worn
• Restore water and check for leaks before reassembling panels

This sprinkler nozzle directs wash water into a focused spray inside the dishwasher for effective coverage. Replacing a clogged or damaged nozzle restores proper spray pattern and helps improve cleaning results, especially on the upper rack.

• Channels water through the sprinkler assembly for targeted spray coverage
• Maintains the correct spray pattern and pressure for thorough washing
• Replace if clogged with mineral deposits, cracked, loose, or missing
• Symptoms can include poor cleaning, weak/uneven spray, or the upper rack not getting clean

• Disconnect power and water supply before servicing; allow the tub to cool
• Pull out the rack to access the sprinkler area; remove the old nozzle (snap or twist fit varies by model)
• Clean mating surfaces and install the new nozzle securely, ensuring proper alignment
• Run a short test cycle to verify normal spray operation

This pump hose and clamps create a sealed connection between the dishwasher's pump and internal plumbing. Replace when the hose is cracked or clamps are corroded/loose to stop leaks and restore a secure, watertight fit. What it does:

• Creates a sealed connection between the pump and internal plumbing
• Helps contain water flow during wash and drain operation
• Replace if the hose is cracked, brittle, swollen, or deformed
• Symptoms include water leaking under the dishwasher or loose/corroded clamps

• Disconnect power and water; pull the dishwasher forward as needed for access
• Expect residual water—protect flooring and have a towel or pan ready
• Remove old clamps and hose; fully seat the new hose on fittings, then position and secure clamps at the bead/ridge
• Run a brief cycle and check for leaks before reinstalling

The Spray Arm Connector Assembly is an OEM replacement part for GE dishwashers. This assembly connects the upper and lower spray arms to the water inlet valve, allowing water to flow through the spray arms during the wash cycle. 

Symptoms of a bad spray arm connector assembly include: 

• Uneven or inconsistent water coverage on dishes
• Clogged or kinked spray arm assemblies 
• Leaks at the tub connections
• Reduced water pressure impact 

Causes of a bad spray arm connector assembly can be mineral buildup affecting water flow, cracked or damaged connectors, or wear over time.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A small adhesive MG logo emblem that restores the original appearance of your appliance. This peel-and-stick badge replaces a worn, faded or missing logo to keep the exterior looking factory-fresh. What it does:

• Cosmetic replacement for a missing, scratched or faded MG emblem
• Adheres to control panels, doors or trim where the original badge was located
• Restores brand identification and a finished appearance to the appliance
• Simple adhesive design avoids the need for fasteners or tools

• Clean and dry the mounting surface before applying to ensure good adhesion
• Peel backing and press firmly in place, aligning carefully before contact
• Avoid repositioning once attached; removal may damage the emblem or finish
• For safety, disconnect power before working near electrical controls or panels

This adjustable leveling leg replaces a worn or damaged support foot to stabilize and level the appliance, reducing rocking and helping ensure even operation. Easy to adjust for a secure, balanced fit under the appliance. What it does

• Provides a stable, adjustable support foot to level the appliance on uneven floors
• Helps stop rocking, vibration, and noise caused by an unbalanced appliance
• Restores correct appliance height for proper door/clearance alignment and drainage
• Compatible with standard screw-in mounting used on many GE laundry appliances

• One adjustable leveling leg

• Turn off and unplug the appliance and empty loads before adjusting or replacing legs
• Raise or tilt the appliance slightly using appropriate tools or a helper to access the mounting point
• Thread the leg in/out to adjust height, then confirm stability and even weight distribution on all legs
• If multiple legs are worn, replace all feet to maintain proper leveling and balance

This spring washer provides a tensioning/retaining function to keep fasteners and components secured under vibration and movement. It helps maintain proper assembly alignment and reduces the chance of parts working loose over time. What it does:

• Applies spring tension to fasteners to prevent loosening from vibration
• Helps keep assemblies aligned and components seated correctly
• Can reduce rattling, vibration noise, and intermittent contact caused by loose parts
• Restores proper clamping force when worn or damaged washers allow play

• One spring washer

• Disconnect power to the appliance before beginning any repair
• Use appropriate tools to remove fasteners and note component orientation
• Replace only with the exact part number to ensure correct fit and function

This door hinge pin is the pivot that allows a dishwasher door hinge to open and close smoothly. Replacing a worn or missing pin restores aligned, controlled door movement and proper latching performance.

• Provides the hinge's pivot point between the hinge arm and the cabinet/frame
• Helps maintain proper door alignment for smooth opening and closing
• Wear or damage may cause squeaking/clicking, binding or uneven motion, door dropping too quickly, or difficulty latching
• Restores correct hinge operation when an original pin is bent, worn, or missing

• Disconnect power at the breaker and turn off water before servicing
• Support the door and relieve hinge spring tension; remove the toe-kick/access panel to reach the hinge area
• Remove the old pin and install the new pin through the aligned hinge holes; ensure it is fully seated
• Test door movement and latching before reassembling and restoring power

This heating element assembly supplies heat for tumble drying, restoring warm airflow so clothes dry efficiently. It replaces a failed or burned element to help return normal drying performance. What it does:

• Generates the hot air used to dry clothes by heating incoming air that circulates through the drum
• Commonly replaces a burned-out or open element that causes no heat or reduced heat
• Helps address symptoms like cool air from the dryer, extended dry times, or loads that never fully dry
• Works with the dryer's safety thermostats and fuses to regulate operating temperature

• Heating element assembly (1)

• Disconnect power at the breaker or unplug the dryer before starting any repair
• Allow all components to cool and wear gloves to avoid sharp edges
• Basic hand tools are typically required; follow the dryer's service manual for safe removal and reassembly
• If the dryer still has heating issues after replacement, inspect thermostats, thermal fuses, and wiring