Rps Sensor Parts

Microwave won't turn on or has no power? This fuse and holder assembly restores overcurrent protection when a blown fuse interrupts operation.

Fix TE error code on your washer with this thermistor temperature sensor. Restores accurate temperature sensing and reliable cycle control.

Fix a dryer that won't heat with this thermostat. Regulates heating element temperature to prevent overheating. Moderate DIY repair in under an hour.

Fixes frost buildup on freezer back wall and ice accumulation between compartments. Tests closed for continuity when cold. Common fix for cooling issues.

This temperature sensor monitors refrigerator temperature and sends readings to the control board so the appliance can regulate cooling. Replacing a failing sensor restores accurate temperature feedback for reliable cooling performance. What it does

• Measures internal temperature and reports it to the refrigerator control board
• Helps the system cycle the compressor and fans correctly for stable temperatures
• Commonly linked to symptoms like poor cooling, frequent compressor run, or temperature-related error codes
• Works as the sensing element for automatic defrost and temperature-control routines

• One temperature sensor (thermistor) with attached lead

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the sensor and wiring gently; secure the lead per factory routing to avoid contact with moving parts
• May require basic hand tools and access to the evaporator/thermostat area

Fix dryer overheating or not heating issues with this thermistor assembly. Monitors temperature throughout drying cycles for proper heat regulation.

Fix frost buildup in your freezer with this defrost thermostat. Controls defrost cycles by sensing evaporator temperature. Simple DIY repair in 30 minutes.

This 20-amp circuit breaker restores overcurrent protection to the appliance's electrical circuit, helping prevent damage from short circuits or overloads. It replaces a worn or tripped breaker so the appliance can receive proper power. What it does:

• Acts as an overcurrent safety device that trips when current exceeds safe limits
• Protects wiring and components from damage caused by overloads or short circuits
• Common symptom: appliance won't power on or stops powering intermittently
• Common symptom: breaker repeatedly trips during normal operation

• Disconnect power at the house breaker before inspecting or replacing the part
• Handle terminals carefully; ensure connectors are fully seated and tight
• Replace with the exact part number for fit and proper electrical rating

A 2 amp replacement fuse that protects low-current appliance circuits by opening when an overcurrent occurs. Install this direct-replacement fuse to restore power to control circuits and stop damage from a blown fuse. What it does:

• Interrupts current in control or low-voltage circuits when the fuse rating is exceeded
• Prevents electrical damage by opening the circuit on overloads
• Common symptoms of a blown fuse: appliance won't power on, controls are unresponsive, or intermittent operation
• Use as a like-for-like replacement matched to the original 2 amp rating

• Disconnect power to the appliance before inspecting or replacing the fuse
• Replace only when the appliance is cool and dry; avoid touching conductive ends

This thermostat light is the small indicator lamp that illuminates the control area so you can see thermostat settings and status. It provides a clear visual signal when the control is powered. What it does:

• Lights the thermostat/control panel area for visibility
• Indicates when the control or circuit is energized
• Commonly replaces a burned-out or dim lamp
• Helps diagnose a non-illuminated control (lamp failure vs. power issue)

• Disconnect power to the appliance before inspecting or replacing the lamp
• Remove the control panel or housing per the appliance service instructions to access the lamp
• Handle the lamp and connector carefully to avoid damage; do not force wiring
• If the control remains unlit after replacement, test for power to the control

Fix inaccurate oven temperatures or temperature error codes with this oven temperature sensor. Monitors cavity heat for precise baking and broiling control.

This temperature thermistor is the sensor that lets the control board monitor and regulate appliance temperature for reliable cooling performance. Replacing a failing thermistor can restore proper temperature control and cycling. What it does:

• Senses internal temperature and sends readings to the control board
• Helps the compressor, fans, and defrost system run at the right times
• Commonly linked to symptoms like incorrect temperatures, overcooling, or frequent on/off cycling
• A faulty thermistor can cause improper defrost timing or erratic cooling behavior

• Disconnect power before inspecting or replacing the sensor to avoid shock
• Handle the sensor and wiring connector gently to avoid damage
• Mount the sensor in the original location and secure wiring per OEM routing

5 A, 125 V electrical fuse that restores circuit protection when the original fuse is blown. Replacing the failed fuse helps prevent further electrical damage and can restore normal appliance operation. What it does:

• Provides overcurrent protection for the appliance circuit to stop excessive current flow.
• Replaces a blown or open fuse that prevents the appliance from powering up.
• Common symptom: appliance has no power or a circuit/component won't operate.
• Common symptom: intermittent power or a fuse that visibly shows a blown element.

• Always disconnect power (unplug or shut off breaker) before inspecting or replacing the fuse.
• Replace only with the exact rated fuse (5 A, 125 V) and part number to maintain proper protection.
• Do not bypass the fuse or use makeshift substitutes — that can cause fire or equipment damage.

Dryer won't heat or shuts off too soon? This high-limit thermostat prevents overheating by cutting power when temps get too high. Easy DIY fix.

This thermostat is a direct-replacement oven temperature control that helps the oven maintain the set cooking temperature for consistent bake and roast results. It restores proper temperature sensing when the original fails. What it does:

• Senses oven cavity temperature and signals the heating element or gas valve to cycle on/off
• Helps correct issues like oven running too hot, too cool, or baking unevenly
• Works as the temperature-regulating sensor used by the oven control system
• Matches OEM function for reliable temperature control and repeatable cooking results

• One thermostat as shown

• Disconnect power (or gas) before beginning any repair; verify power is off with a meter
• Accessible from the oven control housing or rear panel on most models; remove trims/panels as needed
• Handle component and capillary/tubing carefully to avoid kinks or damage

This 15 amp, 250 volt replacement fuse protects your appliance's electrical circuits by interrupting power when a fault or overload occurs. It restores safe operation once the underlying issue is fixed and the fuse is replaced. What it does:

• Acts as an overcurrent protection device for circuits rated up to 15 A and 250 V
• Prevents damage to wiring and components by opening the circuit during an overload or short
• Common symptom: appliance has no power or specific functions stop working after a sudden failure
• Replacing a blown fuse can resolve intermittent power loss or complete power failure tied to a single blown element

• Disconnect power to the appliance before inspecting or replacing the fuse
• Replace only with a fuse of the same amperage and voltage rating to maintain safety and proper protection
• Use insulated tools and avoid touching live terminals; internal access may require disassembly, follow OEM service instructions
• If fuses blow repeatedly, stop using the appliance.