Fftw1814lwm Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't spin or clothes stay sopping wet? The actuator motor shifts between wash and spin cycles. Moderately difficult repair for DIYers.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

Fix loud banging or off-balance spins caused by worn suspension rods. This assembly stabilizes your washer tub and dampens vibration during cycles.

Fix a washer that won't drain or leaks during the drain cycle. This pump and hose assembly restores water removal. Direct-fit installation for most models.

The Off-Balance Switch is an OEM part for Frigidaire washers. This switch is responsible for detecting vibrations and off-balance loads during spin cycles. It plays an important safety role by automatically stopping the machine if it senses excessive shaking that could damage components or cause the unit to walk or move during operation.

Symptoms of a bad off-balance switch include:

• The machine failing to detect off-balance loads and continuing to operate even with shaking
• Frequent trips of the circuit that stops the machine
• Inability to complete higher spin speeds due to sensed imbalance

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Drain hose outlet for washer tub. Guides water from the tub through the drain hose. Replace if cracked, leaking, or damaged to restore proper drainage.

This water inlet valve controls the flow of water to the refrigerator's dispenser and ice maker, restoring proper fill and water flow when the valve is stuck closed or leaks. It fits into the fridge water line and mounts to the cabinet. What it does:

• Opens and closes to allow water into the ice maker and dispenser when commanded
• Stops water flow to prevent overfilling or constant leaking
• Commonly replaces valves that leak, fail to fill, or no longer dispense water
• Works with the refrigerator's water pressure and solenoid controls to time fills

• One water inlet valve

• Turn off power to the appliance and shut off the water supply before replacing the valve
• Drain remaining water from lines and have towels ready; expect minor residual water
• Tighten water fittings to the manufacturer's torque; check for leaks after installation

Fix a washer that won't start or displays lid lock errors. This door lock assembly secures the door during cycles. Moderate DIY repair for most users.

Fix a washer that won't start or spin when the lid is closed with this lid switch replacement. Common fix for safety interlock issues. Moderate difficulty.

Fix washer detergent not dispensing or leaking during cycles with this dispenser assembly. Directly replaces worn or cracked dispensers in top-load washers.