Amana Cooktop Parts

The Knob, Burner is an OEM part for Whirlpool cooktops and ranges. This knob allows users to control the burner settings, adjusting the flame size and heat output for precise cooking. It is designed to fit securely onto the burner valve stem and provide a user-friendly interface for operating the cooktop.

Causes of a bad burner knob can include regular wear and tear, physical damage such as cracking or breaking, or exposure to high heat. A faulty knob can make it difficult to control the burner or render it inoperable.

Symptoms of a bad burner knob include:

• Difficulty turning the burner on or off
• Inability to adjust the flame size properly
• Loose or wobbly knob
• Visible damage or wear on the knob

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This oven bake element heats the bottom of the oven cavity to bake and roast foods evenly. Replacing a damaged element restores proper oven heating so your range can reach and hold cooking temperatures. What it does:

• Heats the oven cavity from the bottom to brown and cook foods
• Common fix for ovens that won't heat or take too long to reach temperature
• Replaces elements that are visibly broken, burned through, or no longer glowing
• Helps eliminate uneven baking or cold spots caused by a failed element

• One bake element

• Disconnect power to the appliance at the breaker or unplug before starting any repair
• Handle element carefully; sharp edges and ceramic insulators can break
• Verify terminal connections are secure and avoid touching terminals while energized

Replacement gasket that restores a tight seal to the appliance door and helps prevent water or air leaks. Replaces worn, cracked, or compressed seals so the door closes properly and reduces moisture or heat loss. What it does:

• Seals the door opening to stop leaks of water, steam, or heated air.
• Helps maintain proper temperature and efficiency by preventing air exchange.
• Reduces condensation, odors, and cycling caused by a poor seal.
• Common signs you need this part: visible gaps or damage, leaks around the door, excess moisture, or poor heating/cooling performance.

• Disconnect power and water (if applicable) and allow the appliance to cool before starting.
• Clean and dry the mating surface to ensure a proper fit; remove old adhesive or debris.
• Align the gasket into the door channel or groove and press evenly; avoid stretching the material.
• If the door or mounting hardware is bent or damaged, repair those parts before installing the gasket.

A white replacement knob for the top burner valve that restores safe, reliable control of the burner. Easy-to-grip design helps you adjust heat precisely and replaces worn, cracked, or stripped knobs. What it does:

• Provides user control for the top burner valve so you can set flame/heat levels
• Restores grip and tactile feedback when the original knob is cracked or faded
• Replaces knobs that spin freely due to stripped splines or broken retainers
• Helps prevent accidental changes to burner settings when fitted correctly

• Turn off the cooktop burner and follow your appliance's safety instructions before servicing
• Most knobs install by aligning the splines and pressing onto the valve stem; remove by pulling straight off
• If the valve stem or splines are damaged, replace the valve assembly rather than forcing the knob

This is a replacement white gas control knob that restores manual burner control and a finished look to the cooktop. Easy-to-grip design lets you set flame level precisely for safe, consistent cooking. What it does:

• Fits onto the range valve stem to turn gas burners on and off and adjust flame intensity
• Replaces cracked, melted, faded, or missing knobs that prevent proper control
• Helps stop accidental gas flow when a knob is stuck, damaged, or slipping on the stem
• Restores a uniform appearance to the cooktop when original knobs are worn

• One white gas control knob

• Turn off all appliance power and gas supply before removing or installing the knob
• Pull old knob straight off the valve stem; align new knob spline and push on until seated
• If knob is tight or won't seat, inspect valve stem for debris or damage; do not force
• If you smell gas or suspect a leak after installation, stop use.

This Mylar overlay is the thin white control-panel face used to protect and label stove or oven touch areas while keeping buttons and displays visible. It restores a clean, readable control surface and helps prevent wear. What it does:

• Protects the underlying control panel from spills, grease, and everyday wear
• Provides the labeled surface for buttons and touch controls to improve legibility
• Maintains original appearance and helps ensure consistent button response
• Safe, commonly replaced when the panel is scratched, discolored, or peeling

• One white Mylar overlay

• Designed to fit over the existing control surface; follow OEM alignment marks for proper placement
• Clean and dry the panel area thoroughly before installing to avoid trapped debris or bubbles
• Use gentle, even pressure when applying; avoid stretching or folding the Mylar

This replacement control knob lets you set and adjust heating levels on a stove or oven. It restores a secure, easy-to-grip interface so you can accurately choose burner or oven settings. What it does

• Fits onto a stove or oven control shaft to change temperature or burner settings.
• Provides a clear tactile grip for reliable adjustments.
• Helps resolve issues like a broken, stripped, loose, or missing knob that's hard to turn.
• Works as a direct replacement when the original knob is cracked, worn, or lost.

• Disconnect power to the appliance or ensure controls are off before installing.
• Align the knob splines with the control shaft and press firmly until seated.
• If the old knob is stuck, use a gentle pulling motion or a plastic puller to avoid damaging the shaft.

This snap-in bushing provides a low-profile bearing surface to support rotating shafts and reduce wear and noise in appliance assemblies. It restores smooth operation where the original bushing is worn or damaged. What it does:

• Provides a replaceable bearing/sleeve for rotating shafts and posts
• Reduces friction and wear on housing and moving parts
• Helps eliminate rubbing, grinding, or rattling noises during operation
• Maintains correct shaft alignment for smooth rotation

• One snap-in bushing

• Disconnect power before servicing and follow all safety instructions
• Access may require removing panels or covers; inspect surrounding parts for wear
• Press or snap the bushing squarely into the housing until fully seated; avoid deforming it
• Replace any damaged retainers or seals and test operation after reassembly

This control knob replaces a worn, cracked, or missing knob to restore manual control of your appliance's settings. It provides a simple, tactile interface so you can select cycles, temperatures, or power levels with confidence. What it does:

• Fits onto the appliance control shaft to allow easy adjustment of settings.
• Replaces damaged, melted, or stripped knobs that are difficult or unsafe to use.
• Restores secure grip and accurate selection of cycles or temperatures.
• Helps resolve symptoms like a loose, spinning, or non-engaging knob.

• Disconnect power to the appliance before servicing to reduce shock risk.
• Most knobs are removed and installed by pulling straight off and pushing the replacement onto the shaft; avoid excessive force.
• If the knob feels loose or won't engage, stop and verify shaft type and attachment method for your model.