Garth for Model Number Bosch Dishwasher SHV46C13UC / 40 The machine appears to run a wash cycle normally, but there is dirty/used wash water left at the bottom of the machine. I have checked the drainage pipe - all good. I have manually drained the machine and left it overnight and no more water appears. So not a leaky inlet or 'backwash' from the sink. I pulled the machine and found the 'emergency/ overfull drain'. activated it manually and the pump ran, and the machine drained. I tried a reset that didn't work. If I start a cycle and then do a cancel & drain the Clean light comes on, but the pump doesn't activate. In summary, it's not a drain line problem, and the pump is working. It's just not activating at the end of the wash cycle (or the cancel drain cycle). Is it a float problem (i don't think so?) or is it a controller problem or is there something else to look at?
Answer Hello Garth, Since the drain pump operates when activated by the flood switch, you will need to replace the control unit 00676967. Read More... Answered by AppliancePartsPros.com | Tuesday, January 18, 2022