Paul for Model Number SEC301BS This is a Thermador wall oven, single unit. Same story as others. Repeated F34 shut downs, the third or fourth try usually works. Fan always runs. When I inspect through the bottom vent, there are no sail switches in there, as depicted in all of the literature for the double oven. Does the single unit detect fan speed with something on the fan itself? Can cleaning the fan area help? How likely is it that the problem is the relay board or control board reading signals incorrectly?
Answer Paul, cleaning the fan area and ensuring that the ventilation is clear of anything that could prevent airflow can certainly help. The fan motor can be tested from the relay board at connection P6 pin 5 (red probe of meter) to pin 3 (black probe of meter) for 18VDC and then from pin 4 to ground chassis for 2VAC. If the voltages read good, then the issue is the relay board 00427198. If there is 18VDC but not the 2VAC reading, then the fan motor 00440604 would need to be changed. If there is not 18VDC, then the relay board is bad and is not sending proper voltage to the fan motor. Read More... Answered by AppliancePartsPros.com | Friday, December 27, 2019