Jim for Model Number Shu 6802ul Bosch dishwasher Wash cycle does not advance to rinse & hold resulting in poorly cleaned dishes. The water valve was replaced, for the same problem, in 04 so I suspect this problem has reoccurred? My other suspicion, pending further diagnosis, is that the control board needs to be replaced? I will also disassemble and clean the filters at the bottom of the washer. Am I on the right track? Or any additional suggestions would be most welcome. thank you, Jim
Answer Hello Jim. Make sure the heating curcuit is good. If so, then check the valve. If it is good, replace the control module. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, November 20, 2013