Customer Questions and Answers for Facia Panel by Bosch

Paul, No, you don't have to remove the "entire door pane l". First, make sure you remove power to the dishwasher. Tools needed: T-20 Torx & flat blade screwdrivers.1.Remove fascia panel by removing six (6)T-20 Torx inner door screws.2.Disconnect wire harnesses from module after noting connector locations. 3.Remove fascia panel from console by removing four (4) T-20 Torx screws.4.Remove two (2) T-20 Torx screws holding module to console.5.Carefully pry back locking tabs on each front corner of module, then remove module from console. Remove button pad from module." Reverse the procedure, restore power to the dishwasher and test for operation.