Customer Questions and Answers for Range Lp Gas Conversion Kit by Frigidaire

Hello Bill. This model is convertible. You adjust the orifices and flip the regulator to convert the unit. 1. Lift cooktop to gain access to the surface burner
spuds.
2. With ½" wrench, turn spud down or clockwise until
snug (approximately 2 ½ turns). This restricts the
flow of gas through spud to that allowed only by the
hollow LP metering pin. Do not overtighten. 3. Lower main top and apply gas to check for proper
flame size. Flame should be steady with
approximately ½" blue inner cones and no yellow or
orange tips. Proper Air Adjustment
If air shutter is adjusted so that too much air flows into
the burner, the flame will appear unsteady, possibly
not burning all the way around and will be noisy (like
a blow torch). Do Not Remove the Pressure Regulator
Remove cap-screw and snap out the nylon gas
indicator by pushing it sideways. Turn the nylon gas
indicator for type gas (Natural or LP) and snap it back
in the cap-screw. Put cap-screw back on gas
regulator.