Eric D. for Model Number PLGFZ390ECB I recently converted my house from oil to gas and the Frigidare oven which was run on propane now has the natural gas line running to it.. the conversion guy said he switched the setting on the rear bottom of the oven from the propane to natural gas setting but I have to replace the 5 fittings on the burners from propane size which is on there now to natural gas size fittings using a 7mm magnetic nut driver. if you guys have the conversion kit from propane to gas please let me know what part number it is and ill order it, also the 7mm magnetic nut driver if possible. Thank You
Answer Hello Eric, You will have to order the first one listed as an assembly since this orifice is not offered by the manufacturer separately. You will need one 316430500, one 316237903, one 316237901, and two 316237902. As a note, these are brass and will not be attracted by a magnetic bit. I use a 7mm socket and a piece of electrical tape. Put the sticky side of the tape toward the socket so it will come out with the socket when you pull it out of the orifice area. Read More... Answered by AppliancePartsPros.com | Thursday, April 24, 2014