Bob for Model Number FFGF3015LBD I ordered Part AP4374168 And used GRLP3 out of the kit , 4 orifices on the top burners and they work fine , also converted the regular, it is the steel top type. On the oven I turned the spud down for LP and adjusted the air on it and I get a high flame that comes up into the oven. No matter where the air adjustment is it still gets a high flame inside the oven. Please help me out on this.
Answer Bob, It sounds like there's no LP pin inside the valve opening. You'll need to remove the orifice from the safety valve and check for the LP pin. ( the LP pin looks like a 3 point arrowhead, with a hole in the point), you'll need to cross reference the orifice to the LP kit and install the orifice. If the pin is there, you'll need to raise it using needle nose pliers and twisting, high enough for it to meet the Nat gas orifice when you turn it down. Thanks and Good Luck Read More... Answered by AppliancePartsPros.com | Thursday, June 14, 2012