Liz for Model Number 32-1012-23/04072-14111403 This is a older model that I really like. Trying to go from Nat to L.P. The metal tag on the unit said to screw all orifices down tight, and flip the pin in the regulater from Nat to L.P. Did that, and still can't get the oven to burn right. the top burners are ok.
Answer Hi. Since the top burners are all working fine, what condition of the flame do you have at the bake burner? You will need to remove the screw that holds the bake burner assy. ( and the flame spreader pan) completely. Disconnect the igniter connector. By removing the burner from its mount, it lifts up and off the bake orifice hood. Use a deep socket to turn the orifice down 2-to- 2-1/2 turns so it is on top of the orifice holder. Do the same to the broil burner orifice hood as well. Adjust each shutter window after reassembly for no yellow flame tips and a strong blue flame inner cone with no lifting of the flame. Thank You. Read More... Answered by AppliancePartsPros.com | Thursday, June 6, 2013