Peter for Model Number Frigidaire ATF6000ES1 The washer stops mid cycle, starts humming and will not continue. I read the error code which indicated E23 (drain pump relay on control board failed) I replaced the control board, turned on the machine and it again started to hum and stall after 10-15min into the cycle. I this time the error code stated E59 ( no tacho signal for 3sec). I tested the motor which checked out ok. The wash tech data sheet suggests replacing the speed control board. I am willing to do that but am wondering whether I may be missing something. Should I check the pump first?
Answer Peter, Yes, check the drain pump 137221600, first. Based on your description it may have a blockage, or the motor itself has failed ( hum noise). In order for the washer to spin, it has to drain first, then the pressure switch resets and the tub should spin. Since the tach circuit and the motor windings check OK, you'll need to check the wiring between the motor and the motor control board and between the motor control board and the new control board. Read More... Answered by AppliancePartsPros.com | Tuesday, January 8, 2019