Mark for Model Number Fridgidaire Stacker GLEH1642DS1 My washer suddenly stopped going through the cycles of wash. It would do what it supposed to do for a bit with wherever I set the knob and pulled out, so fill up and tumble a few times then stop. Light on indicating door is locked but nothing. If I turn the knob it would resume for a bit and stop again shortly after. I'm also fairly sure that when I put it to spin it would just spin for a long time, sometimes seeming not as fast as normal to me and I got a bit worried so turned the knob to get it to stop. I replaced the timer thinking it was the problem and also after having a technician look at it to confirm but it is still doing the same thing. Like when you'd normally hear the timer clicking through it does not. Did I get a bogus timer or is there something else I'm missing to check?
Answer Hello Mark, You may have a bad switch on the door or possibly a bad speed control or loose wiring. You will want to ohm out the motor. You should have between 4 and 6 ohms of resistance. If this is good then more than likely you have a bad speed control. Read More... Answered by AppliancePartsPros.com | Wednesday, January 30, 2013