Arlen for Model Number FDB750RCC1 In previous conversations told to replace timer knob and timer. Ordered and replaced parts. Unit still runs for 2 hours and still not on drying cycle. Helped dial move along to get to next cycle. What could be problem?
Answer Hello Arlen. Make sure the water is hot at the sink before starting the dishwasher. Also, as for the heating issue, test the thermostat 154290204 and the heater 154665201. They should read closed for continuity. If one of these are bad, it can cause the unit to run for longer periods of time. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, October 27, 2011