Answer Hello Jim, As per the service manual, to remove the control panel assembly: 1. Disconnect power to the microwave oven. 2. Open the oven door.3. Remove the grille assembly. (To remove the grille assembly: 1. Open the microwave oven door. 2. Remove the 2 Phillips-head screws from the top front of the oven cabinet. 3. Slide grille assembly to the left and pull out. The bottom of grille is held in place with 2 tabs.Note: The tabs must be inserted when replacing the grille.) 4. Remove the Phillips-head screw that attaches the control panel assembly to the oven. 5. Slide the control panel assembly up and out. Make note of the locations of the 7 wire connectors, 2 relay connectors, and then disconnect them. 6. Remove the ribbon cable by gently raising the connector clip that secures the ribbon cable, then pull the ribbon cable from connector. 7. Remove the Phillips-head screw that attaches the ground wire to the control panel assembly. Read More... Answered by AppliancePartsPros.com | Monday, May 19, 2014