Customer Questions and Answers for Idler Bracket by Ge

Hello Misty. Look at the base of the dryer, in front of the motor, you'll see two(2) slots formed in the base. With the pulley on top and away from the wall, insert the end of the idler The end of the idler pulley assembly into the slot farthest away from the cabinet wall. the two920 tabs on the bottom of the assembly will insert into the slot closest to the wall and you' can hold it in place until you insert the belt between the pulley and the metal shaft(the belt should be on the bottom side of the pulley in a loop) pull the belt until you can slip it over the drive pulley. Turn the drum 2 or 3 times by hand and slowly, so the belt centers up on the drum.