Larry for Model Number DBXE463ED2WW When i shut the door and turn the start button the machine does not start. I have tried several dryer timer settings but still no response. The machine will sound like it has responded and wants to start but no response. I checked the electrical continuity on the switch and when the switch is turned to the on position, the test is positive. I have checked the leads and all are clean. I tested the door switch and it is engaging and showing continuity when the switch is engaged. I the belt is good, and the barrel doesn't make any grinding when turned by hand. What else do I need to troubleshoot before I scrap the machine?
Answer Larry, unfortunately, the model provided does not show as a valid model. If the model number could be verified and provided in a new question, it will allow the most accurate information to be presented. However, if the model is DBXR463ED2WW, the door can be left open and the door switch taped in the shut position. The start switch can then be held in the start position and the drum turned by hand. If the motor starts to operate, the failure is in the start winding of the motor WE17X10010 and it would need to be replaced. If it does not start operating, the timer would need to be tested for 120 VAC at the brown wire found at terminal C. If there is not voltage when set to a cycle, the timer WE4M271 has failed. If there is voltage, the wires would need to be checked for any loose connections or broken sections after unplugging the power supply cord. If the wires are in good condition, it would be likely that the motor has failed entirely. Read More... Answered by AppliancePartsPros.com | Friday, October 6, 2023