Ian for Model Number Kenmore 106.56662500 Kenmore 106.56662500 side-by-side with in-door ice storage and dispense. Water dispenses from door, I recently (within the last six months) replaced the control valve at the left rear of the unit, and more recently replaced the main waiter supply line due to a pin-hole in it. Ice maker is not putting ice into the bin. Ice-maker has ice in it, harvester arms are pointed down into the ice tray. Immediately after opening freezer door, red LED on receiver unit blinks twice, blinks twice, blinks twice, then a long single blink, then repeats. With the door open but the flap on the IR transmitter held, the red LED remains on, sometimes. Other times, with the door open but the flap help, the red LED short-short-long. With the door sensor held and the transmitter flap held, the red LED does not come on at all. All tests above performed with the ice maker switch in the on position. Does the above description suggest the ice maker, the IR transmit and receiver boards, or both? Thanks for your help! i
Answer Hello Ian. Since the boards pass and then fail, I would start with them because they need to be replaced for sure. If the icemaker still does not work after replacement, you will need to replace the icemaker on the unit. Read More... Answered by AppliancePartsPros.com | Wednesday, August 31, 2016