Mike for Model Number kuds01ijbl0 our kitchenaid superba dishwasher does not work, "Rinse only" blinking. Please advise what part should i replace?
Answer Mike, You're on track, "STUCK KEY: If the control detects that a key is stuck in the depressed position, dishwasher operation will be suspended and the control will flash the light for that key until the condition is corrected. If a key without a light is stuck or multiple keys are stuck, the control will flash the light for the Rinse Only/Quick Rinse key." You will also need to reset the control, "Pressing the following option keys in the sequence shown will either start the Diagnostics Cycle or turn on the Rapid Advance feature for stepping through customer selectable cycles: Or SANI RINSE, AIR DRY, SANI RINSE, AIR DRY (Note: HI TEMP SCRUB = HI TEMP SCOUR) (Note: AIR DRY = NO HEAT DRY = ENERGY SAVER DRY) HI TEMP SCRUB, AIR DRY, HI TEMP SCRUB, AIR DRY" Allow the control to advance through the complete diagnostic test, in order to reset the control. Thanks and Good Luck Read More... Answered by AppliancePartsPros.com | Tuesday, December 27, 2011