Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Control Board by Whirlpool

4.89 (64)
By: Whirlpool
Part Number: OEM18019308
Manufacturer Part Number: WP22004257

This control board is made for use with washing machines. The basic purpose of the component is to regulate the speed at which the washer spins during a cycle. It determines and executes all of the essential functions of the appliance. It can control the drain pump, drive motor, fill valves, and other parts. If this part is damaged or malfunctioning, the washer may have trouble draining, spinning, filling, or starting.If this part is damaged, it will need to be replaced to continue using the washing machine. Unplug the power cord from the wall and then take the control knob from the front of the console panel. Pull the washer forward and remove the screws from the top of the back panel. Disconnect the mounting clips and take off the air hose. Remove the mounting screws and remove the control board. Document the placement of wires before disconnecting them. Reassemble in the opposite way and plug in the washer before use.This control board is made to be compatible with washing machines by Maytag. It is sold on an individual basis and directly sourced from the manufacturer. This is a genuine OEM replacement part.

More

Questions & Answers

For Whirlpool Control Board (Part Number: OEM18019308)

View all Questions

Answer

Klapp, The codes first "LR" ( locked rotor) indicates the motor does not run or the control board is not seeing the motor run. The "FL" (failed lock) indicates the door lock switch circuit is not being seen by the control board. You should try opening the control panel console(three screws across the back of the console top, and push backwards on the console and pull the top of the console towards the front of the washer to"roll" th console and access the Wiring diagram and tech data sheet and conduct the diagnostic codes and the board output tests according to the sheet. We'll have a better idea of the issues, once you do. Thanks and Good Luck

Read More...

Answered by AppliancePartsPros.com   |   Thursday, September 15, 2011

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro

Share your thoughts with other customers

Answer or comment
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google