Customer Questions and Answers for Control Board Sensor by Whirlpool

Hello Vander. Based on the code you provided, you will need to test and see if there is power coming to the motor WP34001437. Also, make sure all wires are good and tight on the unit. If so, and the motor is not turning the tub assembly, you will need to replace the motor on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html