Jerry for Model Number MDB6601AWW The digital time readout went out a few weeks ago, but the dishwasher would work. Now the only lights I can get to light up are the Heavy wash, Rinse, Insta wash, and Auto. However, the start button will not light up and will not start the dishwasher. I have power to the water fill valve, float, and power through the door latch to the circuit board. how do i isolate whether it is the circuit board or the control panel?
Answer Jerry, to isolate the possible faulty part, you'll need a multimeter TJMA-DMT3 and the tech data sheet/wiring diagram, located in a plastic bag taped to the back side of the kickplate panel. If all the keypads check properly, replace the control board, but your issue is most likely a faulty control panel/keypad assembly 6-919822 . here's some meter usage information if you need it [http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html] Thanks and Good Luck Read More... Answered by AppliancePartsPros.com | Tuesday, November 15, 2011