Cristobal for Model Number DU945PWSS0 My dishwasher did not seem to have finished its last cycle as there was about one inch of water left at the bottom. The "clean" light was not on either. The touch pad panel does not light up. There is power on the junction box of the appliance. I have checked the thermal fuse and the door switches for continuity. They seem fine. What else could I check before replacing expensive parts? Thanks P.S. On the inside of the panel it says DU915PWSS0
Answer Hello Cristobal. Test for power coming past the fuse to the board. I think you find the fuse 675813 is bad. However, if there is power to the board, past the fuse, then you will need to replace the control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, March 29, 2013