Gouldk for Model Number WED8300SW2 Noticed that our dryer had been running for an extended period of time. Checked it and found that the items were wet and the dryer wasn't warming. Switched to service mode and received an F-29 error code. Should I solely replace the moisture sensor bars or are there other potential causes that I should look into?
Answer Hello Gouldk. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter MA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, March 21, 2016