Customer Questions and Answers for Range Spark Module by Whirlpool

Hello Paul. 1. Turn off and disconnect the gas supply
going to the grill.
2. Pull the knobs off the gas valves. 3. To remove the control panel:
a) Remove the two screws from each of
the bezels and remove the bezels. b) Remove the two control panel mounting
screws from each side on the control
panel. c) Remove the three control panel mounting
screws from inside of burner box
after removing grates. 6. To remove a spark module (s models
only):
a) Remove the two spark module cover
screws.
b) Remove the cover from the spark module. c) Disconnect the wires from the terminals.
NOTE: The wire connectors are
different sizes to prevent miswiring. The
two larger wire connectors are for the
ignition switch, and the smaller wire connectors
are for the ignitors. The ignitor
connectors may be connected to any
of the smaller terminals. d) Remove the two spark module screws
and remove spark module.