Burgeme for Model Number Roper RS25AQXFW02 I first replaced the defrost timer kit (#482493) and kept the old one around for a while thinking I may have put the extra wIire on in the wrong place. It seemed to work fine so I threw the instructions away. We later noticed that the temperature control thermostat was acting up so I replaced that as well. Low and behold - the coils still ice up and the fridge side does not get cold. I've deiced the coils now 3 times with a blow drier and all seems fine for about a week. Can anyone please tell me where the extra wire on the defrost timer kit should go on a Roper RS25AQXFW02? I don't even remember what terminal I put it on. Also, would this refrigerator be considered a 'continuous run application, a 'cumulative version 1' or a 'cumulative version 2'? Just a little extra info - When the fridge was still plugged in, I had the cover off to get to the coils. I put the defrost timer in defrost mode (manually) and the defrost heater did turn on and started melting the ice. I have not replaced the defrost thermostat as it seems to be working - when the coils are iced over, I removed it from the coils and held it in my hand to warm it up. I heard (felt) it click once warmed up. Thanks in advance for any response. - Mike
Answer Hello Burgeme. It goes to terminal number 2 of the defrost timer W10822278. Read More... Answered by AppliancePartsPros.com | Thursday, May 29, 2014