Craigo for Model Number sears coldspot 106.7635240 Installing d/frost timer kit AP3110896. Slightly confused by continuous vs. cumulative, old timer harness connecting to pins were two white on 3, red on 4, black on 1 and red on 2. I hooked the black lead coming from timer to pin 1. Correct? also when I plugged it in the compressor didn't kick on, so I had to rotate the timer til it clicked then it kicked on when I plugged it in. I cut and taped off the green wire that hooked on to the defective timer. Should I be good to go?
Answer Hi Craig. Yes the difference between all the explanations can be confusing. The black motor wire will generally always go on the # 1 terminal. You should be fine. This will give the defrost timer motor the 120 vac needed for proper operation by the timer. There are a bunch of 6-1/2 hrs of timer graduations as you rotate the timer knob. There are precise and simply tiny clicks. The defrost cycle will start when you advance the detentions at the first "Heavy Click". The defrost cycle will normally stay active for approx. 25 minutes and then at the "2 Heavy click" it stops the defrost and starts the compressor in the normal run time. 24 / 7 days a week. Thank You. Read More... Answered by AppliancePartsPros.com | Wednesday, December 14, 2011