Roger for Model Number RDX5634KQ2 When I start my dryer it will heat up for the first cycle then will stop heating and the timer never moves I have replaced the igniter. Do I need to replace the coils.
Answer Hello Roger. It sounds like the coils 279834 are bad on the unit. Check the coils 279834 and see if they test good. You can test the coils using a multi-meter MA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Test the coils after running the dryer for about 10 minutes. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Tuesday, April 24, 2012