Customer Questions and Answers for Timer by Whirlpool

Hello Donna! The timer used on your Maytag model and series is part numebr WP33002808. Per the manufacture, on this model you will also need to purchase a new wire harness WP33002810. Here are the instructions from the manufacture on how to remove the timer, thanks! Timer Removal: 1. Disconnect power to the machine. 2. Carefully life the timer knob and dial off the timer shaft by pulling the knob away from the face of the control console. 3. Remove the two timer mounting screws (now exposed on the control console) when the timer dial skirt is removed. 4. Disengage the console assembly from the top cover and roll forward. Console removal: 1. Disconnect power to the unit. 2. Remove the screws securing the console to the rear cover plate. 3. Lay a drop cloth across the top cover of the washer. 4. Grasp the top of the console and gently rock the top of the console forward away from the rear console back. Note the hooked tabs on bottom of the console, which engage in slots in the top cover. 5. For reinstallation reverse the aforementioned steps.