Robert L Alexandria , LA October 05, 2023 Appliance: Model CEP365ZB/01 Cooktop was cracked on the edge when electrician was trying to lift it out and conduit caught causing him to drop it on counter and breaking the corner cooktop worked but crack was spreading Ordered Ceran Glass Maintop for CEP365, and despite prior report that it only took four screws, the repair took a lot more but was completed with minor difficulty. Glass Maintop comes glued to an aluminum frame and this frame was not exactly square (was off about ¼ inch). All electronics and heating elements must be removed from the old metal case and replaced in the new one. This requires that the burners be centered by attaching standoffs to the case. If the case is not square, the standoffs need to be altered to fit. This is especially true with one bracket that spans the entire case and holds the major burner against the glass. I had to drill another hole in the bracket to attach it to the case. Of note is that the glass arrived safely and came with an exploded view of the way the elements fit in the case and included new screws and standoffs for the two electronic boards. Because of the size and nature of the repair, I used an electrician to help but since it was 110v, he was not necessary. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Screwdrivers
John S Gladstone , MO April 23, 2023 Appliance: Thermador CEP365ZB Thermador cep365 glass cooktop broken. Although the glass cooktop replacement should have been straightforward, the bracket to mount the PC board to the replacement glass cooktop was completely different from our original cooktop. It was still possible to assemble the cooktop with this different bracket but none of the touchless controls worked afterwards. The bracket holes had to be drilled out to allow the PC board pins to pass through it allowing the PC board to move closer to the glass top. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Pliers, Screwdrivers