Hing W Weston , MA May 07, 2016 Appliance: Thermador RDSS30 S/N 9707 & UP Burner not working REMOVE THE TOP COVER OF THE STOVE. THE VENTURI NUTS WERE FROZEN.WITH THE JET HOLDER I HAVE TO CUT OR DRILL OUT THE VENTURI NUTS TO RELEASE THE STOVE COVER. IN DOING SO THE JET HOLDERS WERE ROTATED RELATIVE TO THE MOUNTING BRACKET, AS A RESULT, THE TWO TUBING ASSEMBLIES WERE BROKEN. I ONLY FOUND ONE TUBING ASSEMBLY ON LINE. THE OTHER ONE I HAVE TO ABRICATE WITH 1/4" COPPER TUBING, COMPRESSION COLLARS AND WITH THE TWO NUTS SALVAGED FROM THE BROKEN PARTS Read More... 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Socket Set
Thomas W Santa Rosa , CA July 03, 2017 Appliance: Thermador RDSS30 S/N 9707 & UP 1 burner not working 1 would not "simmer" Replaced potentiometers, simmer control unit, and 2 solenoids. Could have been a fairly easy project, except 1 of the venturi's had "seized" preventing even the removal of the range top. After attempting to use an "easy out", which failed, I had to drill out the brass venturi, destroying it, and the jet assembly below. Once the range top was removed, the rest of the repair went well. Took photo's of all the wiring connections to ensure I put it back together correctly. All burners are back to functioning as designed - simmer works on the 2 left side burners. Used anti seize lubricant to re-install the new venturi. Read More... 8 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Adjustable Wrench, Screwdrivers, Socket Set
Tony B Kendall Park , NJ February 15, 2021 Appliance: Model HEARTLAND 7100 Main stove jet did not work Replaced the jet. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Adjustable Wrench, Pliers, Socket Set, Wrench Set