Bosch Mixer Parts

A replacement control knob that restores user control of a stove or oven dial, making temperature and function selection easy and accurate. Durable design matches original fit and feel for straightforward swap-out. What it does:

• Covers the control shaft and provides a clear grip for turning settings
• Re-establishes secure engagement with the stove/oven control post if the original knob is worn or broken
• Helps stop accidental setting changes by fitting snugly to the splined shaft
• Common symptom: knob is stripped, cracked, loose, or will not turn cleanly

• One control knob

• Disconnect power to the appliance before servicing; ensure cooktop/oven is cool
• Pull the old knob straight off the control shaft; align the knob splines with the shaft and press the new knob fully on
• If the knob feels loose after installation, inspect the control shaft for damage and replace the underlying switch if needed

This lid is the factory replacement access cover used on select Bosch appliances to restore protection and a finished appearance. It helps keep internal components covered and prevents dirt or debris from entering the compartment. What it does:

• Covers and protects the appliance compartment where internal components or controls are located
• Restores proper fit and finish to the unit's exterior after damage or wear
• Helps prevent dust, moisture, and debris from reaching internal parts that can cause issues
• Stops rattling or vibration caused by a broken or missing cover

• High-level replacement: typically unclips or is secured with screws—refer to your model's service instructions or parts diagram for exact fastening
• Disconnect power to the appliance before attempting service to avoid shock or injury
• Handle gently to avoid scratching the finish; use appropriate tools to avoid damaging mounting tabs

This driveshaft transmits motor torque to the appliance drum so the drum rotates smoothly. Replacing a worn or broken driveshaft helps stop excessive noise, wobble, scraping, or failure-to-spin symptoms. What it does:

• Transfers rotational force from the motor to the drum for normal operation
• Maintains drum alignment; a damaged shaft can cause wobbling or uneven rotation
• Failing shafts may cause loud squeaks, scraping noises, or prevent the drum from spinning
• Works with bearings, couplers and support assemblies—inspect related parts when replacing

• Disconnect power before starting work; follow all safety precautions
• Basic hand tools required; refer to the OEM diagram for disassembly steps
• Inspect and replace worn bearings, seals or couplers as needed to ensure proper operation
• If the shaft is seized or rusted, support the drum to prevent damage during removal

Color: stainless. It measures about 3-1/2 inches wide by 6 inches high.

This small rubber gasket seals and cushions an M4 fastener to help prevent leaks and reduce vibration at attachment points. It's a compact replacement part used where a watertight or vibration-damping seal is needed. What it does:

• Creates a seal around an M4 screw or bolt to help prevent water intrusion
• Cushions fasteners to reduce vibration, noise, and metal-on-metal wear
• Restores a tightened fastener's proper sealing surface when the original gasket is worn
• Helps maintain appliance integrity around panels, brackets, or connections

• Power off and unplug the appliance before starting any repair.
• Confirm the gasket's size matches the fastener and seating area before installation.
• Install flat against the mating surface; tighten fastener snugly but avoid over-torquing which can deform the gasket.
• Handle small parts carefully and retain any removed hardware for reassembly.

This spur gear is a direct-drive replacement gear that transfers rotary motion between motor and transmission components, restoring correct gear engagement and part movement in compatible appliances. What it does:

• Replaces a worn or stripped drive gear to restore proper mechanical engagement
• Helps eliminate slipping, erratic part movement, or loss of driven function
• Can stop grinding or clicking noises caused by damaged gear teeth
• Works as a direct mechanical link between motor/drive components and the driven assembly

• Disconnect power and water before any disassembly
• Requires disassembly of the drive/transmission housing; refer to OEM service manual for steps
• Inspect mating gears and shafts for wear—replace any damaged parts to prevent repeat failure
• Use only recommended lubricants per OEM guidance; do not force-fit or modify the gear

This is a replacement door gasket that seals the dishwasher door to help prevent leaks and keep wash water inside the tub. Restores a tight door seal for reliable cleaning and less mess. What it does:

• Creates a watertight seal between the dishwasher door and tub to stop leaks during cycles
• Helps maintain proper wash pressure and prevents water from leaking onto the floor
• Reduces chance of detergent residue and water spotting on the floor or cabinetry
• Commonly replaced when the door leaks, water puddles near the door, or the seal is cracked or compressed

• One replacement door gasket

• Disconnect power and shut off the water supply before beginning any repair
• Follow the manufacturer's disassembly steps for removing the door inner panel or trim—handle panels gently to avoid damage
• Inspect the door cavity and mounting channel; clean and dry before installing the new gasket for best fit
• After installation, run a short test cycle and check for leaks; re-torque any fasteners to manufacturer specs if required

This genuine wire whisk replaces a damaged or missing mixing beater to restore whisking and light mixing performance for compatible Bosch hand mixers and stand attachments. It provides reliable aeration for batters and egg whites. What it does:

• Replaces a worn or bent wire whisk used to whip cream, beat eggs, and mix light batters
• Restores even mixing and improved aeration for better texture
• Helps eliminate uneven or slow mixing caused by damaged beaters
• Fits into the mixer's beater socket to engage with the drive for normal operation

• One replacement wire whisk (single beater)

• Always unplug the appliance before removing or installing attachments
• Remove the old beater by pressing the eject/release button or twisting per your mixer's method, then insert the replacement until it clicks or seats securely
• Test operation briefly at low speed to confirm proper engagement before full use
• Inspect for damage before each use and discontinue use if the whisk is bent or wires are loose