Briggs & Stratton Chipper Shredder Parts

This is a genuine replacement oil fill cap that is found on many lawn and garden engines. The oil fill cap is responsible for securing the oil dipstick and fill tube. This small plastic plug screws into the oil fill tube with plastic threads and secures the oil, keeping it from leaking and providing the appropriate engine pressure. Over time, this small plastic piece can become worn, corroded, damaged, or even lost, which will require a full replacement. Without an oil fill cap, the pressure cannot be maintained in the engine and the oil could spill out of the machine. This genuine OEM oil fill cap is manufactured by Briggs & Stratton to exact standards. It is compatible with engines and equipment from this brand, as well as those from Toro, Snapper, and Vanguard. The oil fill cap is sold as an individual part and does not include the dipstick or any other parts and accessories. It is a good idea to inspect caps and other elements when performing maintenance to ensure proper operation. When replacing the filler cap, no tools are required, but the engine should be cool before doing any kind of work.

This is a replacement spring cap that will ensure the spring retains the correct position between the spring and the diaphragm. It is sometimes called a carburetor diaphragm spring cap. If there is an issue with the spring cap, it could cause issues with the placement of the spring, along with carburetor problems. The engine may not run properly, and it could be more difficult to start. Owners should check the spring cap if they notice issues with their engine, as well as during maintenance check-ups. In some cases, the spring cap could become corroded or broken, and getting a replacement becomes essential. The spring cap is a genuine OEM replacement part for small engines including lawn mowers, tillers, leaf blowers, generators, chippers, and log splitters. The cap is compatible with a range of brands including Craftsman, Toro, Briggs & Stratton, Cub Cadet, Lawn-Boy, and Simplicity.

This part is a replacement connecting rod. This is a genuine OEM part made by Midwest Engine and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken connecting rod in outdoor power equipment. This part connects the crankshaft in the equipment's engine to the piston. It is essential for proper functionality and will need to be replaced if broken, faulty, corroded, or ineffective in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this connecting rod, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this connecting rod is suitable for use on outdoor power equipment manufactured by Midwest Engine, Briggs and Stratton, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a blower housing. This is a genuine replacement part made by Midwest Engine. This part is responsible for the blowing mechanisms used in different types of leaf blowers or snow blowers. A new blower assembly might be needed if the current blowing mechanisms are not working as properly as in previous uses. If the air is not being expelled from the machine, it is most likely due to a faulty blowing assembly. If this is the case, it should be replaced as soon as possible. Refer to the user manual for more instructions on how to replace this part properly and safely. This blower assembly is a genuine OEM replacement part to ensure proper fit. This part is also sold individually and is sourced directly from the manufacturer.

This replacement part is a float bowl. This part is a small part of the carburetor and is able to hold a small amount of liquid gasoline. This serves as a reservoir for fuel.If the engine is unable to run due to lack of fuel, it might be because of a malfunctioning float bowl. Be sure to wear work gloves during this repair as working near the carburetor might be dangerous in certain situations. This is a genuine replacement part made by Midwest Engine. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This replacement part is a carburetor overhaul kit. This kit includes multiple parts that are needed to rebuild or repair a damaged carburetor.Be sure to diagnose the issue before purchasing this kit to ensure that the needed parts are included. A damaged carburetor may cause hard starting or black smoke exhaust during use. Wear work gloves when working with the carburetor. The engine should be powered down and cooled off before starting this job.This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

This is a starter rope that is used in the starter assembly of many sorts of lawn and garden equipment. It works with tools with small engines by engaging the starter pulley when the rope is pulled so the engine turns on. Through use, wear and tear can occur. This can cause the starter rope to fray or weaken. When the rope is already weak, it can break and the tool will no longer be able to be used.The most common sign that the starter rope is broken is receiving a handful of rope when pulling the rope to start the engine. If this occurs, the starter rope will need to be replaced. Before starting the replacement process, make sure the machine is turned off and the spark plug wire has been removed. Remove the starter rope from its guide to replace it with a new part.This starter rope is sold as an individual part. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The rope is made for use with lawnmowers, tillers, pressure washers, leaf blowers, and wood chippers manufactured by Simplicity, Lawn-Boy, Murray, Toro, Craftsman, and Briggs & Stratton.

This muffler is designed to be used in a variety of types of lawn and garden equipment to prevent sparks from the exhaust igniting leaves, grass, and other debris. It also reduces the noise that comes from the exhaust. The muffler is made of durable metal, but after regular use, soot can build up and cause issues. The muffler can also experience holes and cracks that prevent the part from working correctly.If the muffler is broken or damaged, it needs to be replaced. The bolts in the muffler should be removed before taking the muffler away from the engine. Take the new muffler and insert the bolts into the holes on it. Install the needed gaskets and heat shields before adding the new muffler to the equipment. Make sure all parts are tightened before using.This is an authentic OEM replacement part this is directly sourced from the manufacturer. It is sold as an individual unit. The muffler is made to be compatible with wood chippers, tillers, snowblowers, and lawnmowers manufactured by Toro, Briggs & Stratton, and Simplicity.

This OEM starter grip is a replacement for select Briggs & Stratton engines. The starter rope grip provides the handle that is used to pull the starter rope. When it is pulled, the starter recoil spring engages the flywheel puller, which then causes the flywheel to rotate and starts the rotation of the blade as the engine fires. The starter rope grip is made of durable plastic but it can become damaged or cracked over time. If it is broken, the rope will be unable to be pulled to engage the engine until the part is replaced. This is a genuine starter grip designed to work with a variety of lawn and garden equipment that features a Briggs & Stratton engine with a pull-start. The starter grip is sold in two pieces with the grip and a cap that snaps on once the rope has been tied inside of the handle to secure it in place. The unit is sold individually. This item does not include the rope or any additional parts.