Columbia Leaf Blower Parts

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

This choke control lever automatically regulates the combined amount of air and fuel that come together in a small gasoline powered engine's carburetor to give a cold engine a fuel-rich mixture when the motor is first started. The control lever has several positions that allow it to adjust the fuel/air mixture in lawn equipment such as lawn mowers, snow blowers, tillers, chippers, log splitters, and other small gas engines. Over time with regular use, the control lever may become worn and must be replaced. There are several signs that indicate a choke control lever may be failing. If the gas tank is full of fresh gasoline but the engine refuses to start, if the engine starts and quickly floods, or if the engine runs at top speed but does not idle, the choke control level may be need to be replaced. Should the choke control lever need to be replaced, it is essential to use an OEM genuine manufactured replacement part such as this one. OEM parts are built to the exact specifications of the equipment's original parts. This part is compatible with Huskee, Cub Cadet, Yard Man, MTD, Yard Machines, and Troy-Bilt brand equipment.

This is a piston ring set for use in various types of small engines. Piston rings help to maintain the gas compression between the cylinder wall and the piston. They ensure that the gas generated during ignition does not leak. When the piston rings go bad, it could result in gray or white smoke from the exhaust, poor performance, and excessive oil consumption.Dirt and normal wear and tear can take a toll on the piston rings. Fuel flooding could also cause damage to the rings. Poor lubrication could cause problems with the piston rings, as well. If there are problems with the rings, owners will want to replace them soon. These piston rings are compatible with certain machines from Cub Cadet, MTD, Yard Machines, Troy-Bilt, Columbia, and Craftsman. This piston ring set is sold individually and comes with four of the piston rings. They are genuine OEM parts that have been sourced from the manufacturer and are made from high-quality material.

This is a genuine OEM valve cover kit which contains the valve cover and inner gasket. The valve cover covers the engine's valves on chippers, tillers, log splitters, and other outdoor lawn and garden equipment. The cover protects the valves from exposure to weather and prevents oil from seeping out and causing damage. The gasket inside the valve cover ensures the lid is sealed tightly against the engine.Valve covers and the gasket require periodic inspection and regular maintenance. An inspection will indicate if removal and replacement are needed. Maintenance assures the gasket is replaced periodically to keep the seal tight. Heat, rain, snow, and normal wear and tear can lead to cracks in the cover and the gasket. Leaking oil, smelling burned oil, engine misfires, and reduced engine performance are good signs that the gasket and cover need to be removed and replaced. A screwdriver is required to remove and replace the cover. Always perform repairs in a well-ventilated area.This OEM valve cover kit is sourced from the manufacturer. It is sold as a single unit. Screws are not included with the valve cover kit. This valve cover kit is designed for various model MTD, Cub Cadet, Yard Machines, and Troy-Bilt engines.

This camshaft assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A camshaft assembly is a piece of hardware important to engines. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a tiller, a chipper, a shredder, a log splitter, and a snow blower. It is compatible with products by brands such as MTD, Cub Cadet, Yard Machines, and Troy-Bilt.The camshaft assembly part is very important when it comes to the mechanical operation of an engine. It rotates in conjunction with the crankshaft of the machine. It performs an important service that involves combining air and fuel as they enter cylinders and the gasses released from them.The replacement or repair process of the camshaft assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This is a governor arm shaft found on lawnmowers, chippers, and other engines on lawn and garden equipment. It is a component of the governor assembly maintains a steady speed regardless of how much stress is placed on the engine. The governor arm is connected to the carburetor arm shaft. One end of this arm is connected to the governor spring and the other to the throttle linkage. Speed is increased or decreased based on the amount of push or pull that is placed on the throttle arm. If the governor arm shaft is bent, broken, or damaged, the governor arm will not be able to maintain its speed. The engine may appear to be stuck in high speed or it won't accelerate at all.Remove the carburetor to access the governor assembly. Disconnect the governor spring and take the linkage off the governor arm. Remove the governor arm from the arm shaft and then remove the broken governor arm shaft. Install the new shaft and reassemble the governor. Reinstall the carburetor. The governor arm shaft is made from heavy-duty metal and is sold as an individual unit. It is compatible with snowblowers, lawnmowers, chippers, and other small engines manufactured by MTD, Craftsman, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, and Husky.

Pistons are essential for proper engine function. When expanding gases push the piston, it turns the crankshaft. When the piston compressed the fuel-air mixture, the spark ignites and causes combustion. If the pistons are going bad, owners might notice white or gray exhaust smoke, low power when accelerating, loss of performance, or excessive oil consumption.Pistons may need to be replaced for any number of reasons. They could have damage to their crown, which could be caused by overheating. There could be impaction marks if they were not installed correctly or if the valve timing is incorrect. The pistons could be fused or have elements that have melted, or there could be cracks in the piston. Any of these issues would necessitate a replacement.This piston is used for select small engines from MTD, Troy-Bilt, Yard Machines, Columbia, and Cub Cadet. Each piston is sold individually and is a genuine OEM part sourced from the manufacturer. Those who need to replace more than one piston will need to buy them separately.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.