Craftsman Chipper Shredder Hose, Tube & Fitting

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This breather tube is a genuine OEM replacement part sourced directly from the manufacturer. It is used on various lawn mowers and small engines to provide ventilation to the engine crankcase and prevent pressure buildup. It attaches to the cylinder assembly so that air can flow in and out and prevent damage to the engine. The breather tube on lawnmowers also has a reed that lubricates the pistons by collecting oil and sending it back to the crankcase. Over time, the breather tube may become dry and brittle, resulting in cracks. A damaged breather tube can lead to blown seals and gaskets, oil leaks, and reduced engine performance. Oil leaks are identified by bluish smoke coming from the exhaust, engine backfiring, or a decrease in overall performance. If this occurs, check the breather tube for clogs or damage. Replacing the breather tube requires a cooled-down muffler and screwdriver. Remove the muffler to reach the tube. Remove the screws holding the tube in place. Remove the tube and check for damage and clogs. Replace with a new tube if it is damaged. Reinstall the tube and screws. Reinstall the muffler. This breather tube is made of durable rubber and is sold as an individual part. The tube does not come with retaining screws. It is compatible with lawn mowers and small engines manufactured by Tecumseh, Toro, and Cub Cadet.

This is a genuine fuel line replacement that can be used with select small engines found in outdoor lawn and garden equipment. The fuel line is responsible for delivering or returning fuel to or from the engine while it is in operation. The engine typically has a fuel return line and an intake line, and both can become corroded, worn, or cracked over time with constant exposure to chemicals and high temperatures. If the fuel lines are damaged, they can leak or fail to work at all, making the engine inoperable. When doing repairs, both lines should be replaced at the same time for consistency. This genuine fuel line provides an exact fit for compatible models. This genuine OEM fuel line is manufactured by Craftsman and designed for use in engines on their lawn and garden equipment, as well as certain models from MTD. It can be used on 4-cycle engines found in lawn tractors and chipper/shredder units that are compatible. This fuel line is made of durable rubber and sold as a single unit. Those who need two lines will have to purchase additional quantities. Always drain the fuel and disconnect the spark plug before working on the fuel tank assembly or fuel lines of any engine.

This breather tube is part of the crankcase ventilation system in a piece of lawn and garden equipment. It includes a one-way valve that helps prevent any exhaust gases from moving back into the engine. It has a reed that lubricates the piston while the tube moves collected oil to the crankcase. The breather tube has fibers that cool and filter the air to prevent the engine from overheating to create the best performance.If the lawn equipment is leaking oil, this can be a sign that the breather tube is broken or needs to be cleaned. In the case where it is dirty, it often creates bluish smoke that comes from the exhaust pipe. When dark smoke comes from the equipment, this is a sign that the breather tube is malfunctioning. A visual inspection will give an indication of whether the tube is dirty or broken so it can be replaced if required.This breather tube is an OEM replacement part that is sourced directly from the manufacturer. It comes as a single tube and is designed for use in snowblowers, lawnmowers, wood chippers, pressure washers, and generators made by Briggs & Stratton, MTD, Tecumseh, and Toro.

This part is a replacement carburetor vent tube. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a broken or otherwise defective carburetor vent tube on different models of small engine outdoor power equipment. The carburetor vent tube forces fuel to move through the carburetor by acting as a vent or port that generates pressure. This part is essential to equipment functionality and will require replacement if broken or faulty. Special tools may be necessary to install this part properly. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this carburetor vent tube, reference the owner's manual or equipment diagrams for specific instructions and part location.This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This carburetor vent tube can be used with a variety of lawnmower and wood chipper models manufactured by Tecumseh and Toro.

Here is an authentic fuel pipe that serves as a replacement for many types of small engines including those on outdoor power equipment. The fuel pipe is made from metal, and it is used as a means to transfer fuel inside of the machine. If the pipe is not working properly, it may mean that the fuel will leak, or it will not be able to flow through to the engine. Even though the metal is durable, there are still problems that could arise. Perhaps there is a clog in the pipe, or there could be a bend. It might not fit correctly onto the machine. Regardless of the reason for the fuel pipe's problem, it is not something that the owner can ignore. They will need to replace the pipe as soon as they can. This is a genuine OEM part that is sold individually. The fuel pipe can work with more than 150 types of engines for machines such as lawn mowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, and Simplicity.