Craftsman Hose, Tube & Fitting

A carburetor needs fuel to produce the required combustible mixture of air and gas. To get fuel, the carburetor draws the liquid directly from the fuel tank. Any excess fuel will be returned to the tank through the fuel return hose or fuel return line. In addition to providing the path, a fuel line is also responsible for preventing over-pressurization, as well as vapor lock. A fuel return line is constructed from a thick rubber material that is also fuel resistant. However, it may still become brittle and crack due to regular wear and tear. Usually, a broken fuel return hose results in symptoms such as engine misfires, loss of power, carburetor flooding, fuel leaks, and hard starting. A brand-new replacement is available here. This fuel line return is an original part from MTD. It measures 3.78 x 3.78 x 0.016 and is compatible with tillers, leaf blowers, and string trimmers made by Craftsman, Ryobi, Yard Machines, MTD, Bolens, and Yard-Man. Installation will require a screwdriver, cutters, and pliers. This fuel line return is sold individually.

This part is a replacement return hose. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or detached return hose in a variety of outdoor power equipment. The return hose returns any excess fuel from the carburetor back into the fuel pump. Over time, this part can become worn or may be punctured, which can cause fuel leaks. In this case, it should be replaced immediately before the equipment is used again. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this return hose, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this return hose is suitable for use on several different models of chippers, shredders, and log splitters manufactured by MTD, Troy-Bilt, Yard Man, Cub Cadet, Husky, and Yard Machines. This is a genuine part made of high-quality, durable materials and is sold individually.

This nipple pipe is a genuine MTD part, sold individually. This nipple pipe can be used as a replacement part for lawn mowers, edgers, log splitters, and wood chippers. The purpose of a nipple pipe is to serve as a fastening connector for various components with female threads, as nipple pipes have male threads on either end.The nipple pipe is a small component, so it can easily be lost or misplaced while the outdoor appliance is in operation. Additionally, the nipple pipe can be stripped over time so it cannot fasten components to one another. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This nipple pipe is compatible with the following outdoor appliance brands: MTD, Yard Machines, Cub Cadet, Troy-Bilt, Huskee, Yard Man, and MasterCut.

This flex tube is a genuine MTD part sourced directly from the manufacturer. It is made as a replacement part for blowers. Especially since it is made of plastic, it is normal for it to need replacement from extended wear and tear.This is a relatively easy repair, although some disassembly of the engine and the equipment is required. To replace the flex tube on a blower, allow the engine to cool completely, disconnect the spark plug to prevent the equipment from accidentally powering on, and empty the fuel tank. Next, detach the blower nzle and extension tube. Loosen and remove the swivel blower tube, detach the cable clip, and remove the screws attaching the original flex tube. Replace the flex tube. Before ordering, inspect the blower to see if new screws are also needed.This flex tube is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines made by Craftsman, Murray, Remington, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.

This fuel line assembly is created for use with string trimmers and is used to bring gasoline to the small engine in a lawn and garden tool. As the string trimmer is used, the fuel line assembly can start to break down, which may result in cracks in the fuel lines or discoloration. This can cause the fuel line to stop working the way it should, which will affect the performance of the trimmer. If the fuel lines are no longer the correct color or seem brittle, a replacement is likely needed. The line can be pinched to see if there are any visible cracks. In some cases, the primer bulb will no longer seal the way it should and will create more air than expected when priming the trimmer. Another sign that the fuel line assembly is damaged is lower power when someone uses the throttle. This is a genuine OEM part that comes directly from the manufacturer. It is a single part that is designed for use in Troy-Bilt, Craftsman, MTD, and Yard-Man string trimmers. No additional tools are needed to make the replacement.

This is a replacement chainsaw fuel line kit that is compatible with a range of chainsaw models. Fuel lines are tubes used to feed fuel to the carburetor and to return unused fuel into the chainsaw's gas tank. If there is damage to the fuel line, it could present large problems including leaks. This will waste fuel and it can be dangerous. If there are issues with the fuel line, replace it right away.The plastic tubes can start to wear down over time. They might crack and break, or they may no longer have tight connections. Make sure that the chainsaw engine is cool before starting any repairs.The replacement chainsaw fuel line kit will work as a replacement for select models of chainsaws from Husqvarna and Craftsman. The kit is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This fuel line kit is a part used in gasoline-powered edgers and trimmers. It delivers fuel from the gasoline tank to the carburetor where it is mixed with air that has come through the air filter. The mix flows into the combustion chamber where it is ignited to turn the driveshaft of the tool. As an added feature, this fuel line kit also has another line to feed excess fuel back into the gas tank. Extra, unneeded fuel sometimes flows into the carburetor when the engine is cold and users are trying to prime the engine. Although durable and intended to last, this fuel line is subject to weathering over the course of several years, especially when subjected to temperature extremes. A broken or fractured fuel line will leak gasoline, resulting in an extremely dangerous situation. Leaking fuel lines must be replaced immediately. This component is easily located, situated between the fuel tank and the carburetor. It is easily disconnected and replaced. When choosing a new fuel line kit, make sure to choose a part like this one, which is a genuine OEM certified part. This fuel line kit is compatible with Jonsered and Husqvarna equipment.

This is a replacement leaf blower tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective leaf blower tube on a variety of different leaf blower models. This tube makes up part of the vacuum attachment assembly. It links the vacuum bag directly to the lower tube. This part can become worn with regular use and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this mulcher kit, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this leaf blower tube is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.