Cub Cadet Home Maintenance Gasket & Seal

The carburetor gasket plate creates a seal between the air cleaner base and the carburetor body. This plate is made of durable material but it is exposed to constant pressure and heat, which can cause it to degrade over time. It can also become damaged or broken, which would require a replacement. If the gasket is degraded or damaged, it could allow air to leak out of the engine, reducing compression and affecting performance. Severe cases could result in total engine failure, which is why replacement should be done as soon as possible. This genuine OEM gasket plate is designed to be used in a variety of log splitters, tillers, and lawn mowers from brands like Yard Machines, MTD, Yard Man, Cub Cadet, Troy-Bilt, and Husky. This carburetor gasket plate is made of durable materials and sold as an individual piece. No hardware is included for this part and will require an additional purchase if needed. Always allow the engine to cool before performing repairs and wear gloves for hand protection.

This replacement part is an external gasket kit. This is a genuine replacement part made by MTD. Gasket kits typically work with the engine to ensure that all parts are working correctly so that the engine is able to power on effectively. A new external gasket kit might be needed if the current one is no longer working properly. This can be due to normal wear and tear or an incident that caused it to stop working. If the engine is struggling to power on or off, it could be due to a faulty gasket kit and should be replaced if this is the case. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This part is a replacement carburetor insulator gasket. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or worn carburetor insulator gasket in outdoor power equipment. Gaskets are essential, as they ensure that the space where components join together is sufficiently sealed, which helps to prevent leaks. Gaskets are subject to wear and tear over time, causing them to become brittle, worn, and ineffective. Thus, this part will need to be replaced. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to place this carburetor insulator gasket, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this carburetor insulator gasket is suitable for use on outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This dipstick oil fill o-tube ring is a genuine MTD part. It is manufactured as a replacement part for various push walk-behind mowers, self-propelled walk-behind mowers, tillers, snowblowers, leaf blowers, log splitters, wood chippers, and other small engines.This part is used to check the level of oil in these machines. Dipstick o-rings especially may become too dirty or damaged to be useful anymore. They may also become lost or damaged. Being able to check the oil is an important maintenance step, so this part must be replaced if necessary. This is a genuine OEM part sourced directly from the manufacturer and sold individually. It is compatible with machines made by many brands, including Huskee, Husky, Yard Machines, MTD, Remington, Yard-Man, Cub Cadet, Craftsman, and MasterCut.

This crankcase cover gasket is a genuine MTD part. It is made for use on several models of log splitters, chippers-shredders, leaf blowers, lawn mowers, wood chippers, and similar machines. This part seals the halves of the crankcase. It is not abnormal for the crankcase cover gasket to become worn over time, but it can also be important to replace it whenever it is disassembled for another engine repair. This ensures that the seal is fresh and complete. This crankcase cover gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines manufactured by Craftsman, Cub Cadet, Huskee, Husky, Mastercut, MTD, MTD Gold, Troy-Bilt, and Yard-Man.

This is a genuine replacement O-ring that is designed for use as a seal in select engines for outdoor lawn and garden equipment. The O-ring is a common part that is used to seal various engine parts and components, and comes in several shapes, sizes, and styles. Owners will need to consult their parts diagram to confirm that this is the correct part as it has multiple applications. This part is made of durable rubber, but over time it can become damaged or worn due to age and require replacement. To replace the O-ring, a screwdriver and pliers will be needed. Simply remove the old O-ring, clean the area, replace the new ring, and then reassemble the rest of the unit. This particular O-ring is responsible for creating a seal between the shaft and camshaft pulley.This genuine OEM replacement from Honda is designed for use in certain models of Honda engines, as well as select units from Toro and Lawn Boy. The part is sold individually and does not include any other parts or components.