Cub Cadet Home Maintenance Generator Parts

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

The starter grip, also sometimes known as the recoil starter knob, is designed to provide a handle to engage the pull-start flywheel on many lawn and garden equipment engines. The handle is attached to a rope, which is attached to the starter housing. When the grip is pulled, the rope causes the starter spring and pulley to engage, which then engages the flywheel and allows the engine to start. Without a starter grip handle, the engine cannot be engaged. A full replacement will be necessary, and this part can do the job. This genuine OEM starter grip handle is designed for use with select engines manufactured by Honda and used on lawn and garden equipment from Honda, Toro, and Lawn Boy. There are more than 150 compatible models. This part requires no tools to install unless the rope needs trimmed. Simply thread the rope through the hole in the starter handle, loop it and tie a knot, and thread it back through the eye bolt that secures the handle in place, if the equipment has that feature. This starter grip is sold individually and does not include the starter rope or other components. It may be wise to disconnect the spark plug before attempting to repair or replace any of the starter components, including this grip.

This lock pin is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, generators, and tillers. A lock pin is a small cylindrical piece that attaches to the end of a nut; the function of a lock pin is to keep the nut in place and avoid it turning and unscrewing itself. Lock pins are among other small fastening components such as screws, nuts, bolts, and washers.A lock pin might have to be replaced in the likely occurrence that it is lost or misplaced; this is a frequent problem as it is a small piece that can disappear without immediately causing some kind of mechanical failure, so it can be hard to notice if it is missing. If the lock pin is damaged, it should be removed and replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This lock pin is compatible with the following brands: MTD, Honda, Cub Cadet, Toro, and Briggs & Stratton. This part sold individually.