Cub Cadet Home Maintenance Lawn Mower Parts
Genuine Mtd part
By: Mtd
Part Number: 942-0741A
Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.
Do-It-Yourself Stories from Customers like You
It was not mulching grass properly Chris V. • Laplace , LA • December 30, 2018
Replaced some baffles and the blade
Read more
More
Genuine Mtd part
By: Mtd
Part Number: 712-04063
Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.
Do-It-Yourself Stories from Customers like You
Scraper blade on my craftsman snow blower was worn to the point the bolts were gone and the blade was catching the augers Martin D. • Monroe , MI • February 11, 2022
Removed old scraper blade. Filed away bent edges where casing was worn. Installed new scraper blade and bolts. added a backing plate to body where erosion occurred. East repair. Best part was that big snowstorm was forecast for Wednesday night. 12-18 inches expected. Parts arrived on Wednesday morning, right at time predicted. I was up and running before the snow hit (actually only got 6 inches. So much for the Storm of the Century)
Read more
More
Genuine Mtd part
By: Mtd
Part Number: 710-1044
Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.
Do-It-Yourself Stories from Customers like You
Chipped blade adapter Jason L. • Philadelphia , PA • August 14, 2018
Bought the replacement part and bolted it right on!
Read more
More
Genuine Mtd part
By: Mtd
Part Number: 712-04065
This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.
Do-It-Yourself Stories from Customers like You
Stripped out steering gear. Wayne H. • Stewartstown , PA • September 21, 2018
New steering column.
Read more
More
Genuine Mtd part
By: Mtd
Part Number: 710-0451
A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security.
Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing.
This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.
Do-It-Yourself Stories from Customers like You
Scraper blade on my craftsman snow blower was worn to the point the bolts were gone and the blade was catching the augers Martin D. • Monroe , MI • February 11, 2022
Removed old scraper blade. Filed away bent edges where casing was worn. Installed new scraper blade and bolts. added a backing plate to body where erosion occurred. East repair. Best part was that big snowstorm was forecast for Wednesday night. 12-18 inches expected. Parts arrived on Wednesday morning, right at time predicted. I was up and running before the snow hit (actually only got 6 inches. So much for the Storm of the Century)
Read more
More
Genuine Mtd part
By: Mtd
Part Number: 712-0417A
Replaces a stripped, damaged, or missing 5/8" hex flange nut on your lawn mower or snow thrower. Secures blades and other components with integrated washer.
Do-It-Yourself Stories from Customers like You
Needed new flange nut for table saw arbor Robert M. • Surf City , NC • May 09, 2019
Standard application
Read more
More
Genuine Mtd part
By: Mtd
Part Number: 741-0660A
This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.
More
Genuine Mtd part
By: Mtd
Part Number: 951-10298
Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no longer provide the same filtering efficiency as before.
If left ignored, the tiny particles could clog the engine and the carburetor. You may experience misfires and no engine start-up. An air filter replacement is cheap and easy to do. Simply remove the air cleaner cover and take out the dirty filter. Insert the new filter into the housing. This replacement will take less than 5 minutes. A screwdriver will be needed.
The MTD 951-10298 Air Cleaner Kit is a genuine air filter from MTD. Each kit comes with one paper filter and one foam filter. The foam filter can be cleaned with water and detergent. The paper filter, however, needs replacement at least once a year. This air filter kit is compatible with Cub Cadet, PowerMore, and Troy-Bilt. It can also work with other garden equipment like wheel string trimmers, chipper-shredder vacuums, and log splitters.
More
Genuine Mtd part
By: Mtd
Part Number: 747-0710A
Hinge pin fastener for lawn mowers. Secures moving components and panels. Replace if bent, missing, or damaged to restore proper attachment and function.
More
Genuine Mtd part
By: Mtd
Part Number: 712-04064
A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.
More
Genuine Mtd part
By: Mtd
Part Number: 736-0242
Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.
More
Genuine Mtd part
By: Mtd
Part Number: BS-298090S
Filters debris from fuel before it reaches the engine. Replace annually or when experiencing fuel flow issues. Confirm fit with your model number.
More
Genuine Mtd part
By: Mtd
Part Number: 710-0599
Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.
More
Genuine Mtd part
By: Mtd
Part Number: 710-04484
Hex head self-tapping screw for outdoor power equipment. Securely fastens components throughout your machine. Replace if missing, stripped, or worn.
More
Genuine Mtd part
By: Mtd
Part Number: 710-0627
Hex screw for lawn mowers, tractors, and snow blowers. Replaces worn, corroded, or missing screws on engines and housings. Identical fit for secure assembly.
More
Genuine Mtd part
By: Mtd
Part Number: 748-0376E
Connects the cutting blade to the drive shaft on push mowers. Replace if adapter is chipped, cracked, worn, or loosened to restore secure blade mounting.
Do-It-Yourself Stories from Customers like You
Chipped blade adapter Jason L. • Philadelphia , PA • August 14, 2018
Bought the replacement part and bolted it right on!
Read more
More