How to Troubleshoot & Replace Ge AP2058413 / WR2X4754 Ice Maker Hose Clamp

Replaced icemaker first; still no ice. (note, the icemaker comes with a pigtail cord extender/adapter that makes it a bit cumbersome to fit cord behind icemaker but finally figured it out). Then checked ohms across water valve electrical prongs (after disconnecting power); showed less than 350 ohms when should be above 500. Replaced water valve and grommet (required removing icemaker again). Found grommet and inlet tubing plugged up with ice. After reinstalling everything, ice started producing and bin was over half full next morning. New icemaker only has 7 cubes whereas original had eight so this one is a bit slower. Only problem was that first water valve kit was missing one of the prongs that convert from 3/16 inch to 1/4 inch as new design had changed from the original electrical connection on the valve. Appliance Parts Pros sent new valve and prongs immediately and I got it in less than 2 days. I was still able to operate refrigerator while awaiting parts as inspected kit and found the missing part issue before attempting to install the valve.