I checked all the connections and replaced two of the high temp sensors( should have watched the videos. I disassembled and cleaned the heat element housing and replaced the heating element. Again watch their videos. The problem was still not repaired so I ordered the main board as it was the only thing I had left. Again checked all the wires connectors etc. After I installed the main board, but still no heat to the element. I rechecked the connector wire on the element and this time I saw a spark. I removed the wire and replaced the connector and were back into business. I think I inadvertently broke the wire while looking for the problem, However, check for power at the red wire before replacing anything. Hope this helped