How to Troubleshoot & Replace Whirlpool AP6013065 / WP8540725 Screw

First I tried to just put the bellow back over the lip and re-secure the inner metal ring clamp. That worked and stayed on - but when draining and spinning popped off again. I replaced the entire bellow and inner metal ring clamp this time. My old drum bellow liner was over 16 years old - NO holes or tears, just really worn down and out. So, I replaced the entire system. I am a single 43-year-old mom and was able to do this on my own. It did take me over 3 hours though. I had a really really hard time getting both the inner metal ring clamp back on and the spring metal ring clamp on at the end...but I finally did it. No leaking and stayed on during spin and drain cycles! Important to have the holes of the bellow at the bottom so it can drain. 

The fix was very easy. It was only 8 bolts to remove, but (as explained by the video) I was able to remove only 6 in order to replace the hinge (because I was able to just slightly lift that side of the door in order to replace the hinge. Very easy! Thank you! 

I followed the video on the website which was absolutely perfect. I would probably say from start to finish it may have been about 15 to 20 minutes. I was most impressed by the person who took my online order. She was very patient and looked up the information needed to be able to make the necessary repair. I thought that I had to replace the whole entire door which made it difficult for me to find the parts I needed on my own.