Tom S Colbert , WA July 04, 2020 Broken bracket. Replaced the bracket. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Tom D Holladay , UT April 08, 2017 Washer detergent dispenser broken Replaced the bracket using two screws and snapped the cover back on. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
George M Eagle , ID February 28, 2017 Appliance: Maytag Washer MHWE950WW02 Dispenser drawer cover broke Ordered bracket for the dispenser. Unscrewed (2 torx screws) from the old bracket to separate it from the old dispenser. Screwed the new bracket onto the dispenser. Slid on the old cover making sure all 4 tabs snap-locked into place. Only needed a #20 torxdriver from my toolbox. Easy. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Roland L Reedsburg , WI August 29, 2016 Plastic broke on handle to detergent dispensing drawer Took out two screws replaced faceplate installed screws back in. Snapped handle back onto faceplate. Took 5 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Wendy E Stacy , MN February 29, 2016 Broken pieces on bracket for soap dispenser cover Quick and easy fix as the cover would no longer hold to the bracket. Removed the two screws, put on the new bracket and put the screws back in place. I was able to snap the cover right back on. Two minute fix. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Willie G Los Angeles , CA October 02, 2015 Broken bracket I removed the broken bracket and installed the new one. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Gregory V Edgerton , WI August 08, 2015 Broken dispenser cover bracket Slid dispenser tray out snapped cover off took 2 screws out changed part put back together Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Sande*mcpherson M Hot Springs , SD July 27, 2015 Bracket pins broke away from cover Removed 2 screws and replaced with new bracket on original cover. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Jack B Williamsburg , VA June 26, 2015 The maytag washer had some broken tabs on the dispenser drawer these tabs hold the trim piece in place Once I figured out which part was needed a new bracket did the trick. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Brad B Eagan , MN April 20, 2015 Appliance: Maytag Washer MHWE450WW01 The tabs on the bracket that hold the handle/cover on had all broken off I ordered a replacement bracket from AppliancePartsPros.com. After receiving the replacement bracket, I had the old one off and the new one on in a few minutes. Then I snapped the handle/cover back on and everything was like new again. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers