Paul C New Bern , NC April 16, 2018 Broken front wheels. Replaced wheels as shown in the video on the AppliancePartsPros website. Worked perfectly. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Charles H Sunrise Beach , MO September 25, 2017 Front wheels were worn out on ice box. Replaced the front wheel assembly. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Darren M Lexington , KY January 25, 2025 Appliance: Model ED5GHE XNL 00 The front and back rollers to my refrigerator were dry rotted and falling apart These were the exact replacement for my refrigerator and worked perfectly. Installation time for each wheel assembly was five minutes, so about 20 minutes in total. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Socket Set
Sean M Houston , TX November 12, 2024 Plastic rollers starting to disintegrate Replaced all rollers; hardest part is tipping refrigerator on its side enough to get a piece of wood to support it while the roller is being replaced. See the videos on installation. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Socket Set
Niles W Colorado Springs , CO November 15, 2019 Appliance: Model KENMORE REFRIGERATOR All four wheels had disintegrated black rubber had broken down I first ordered the listed roller assembly (front wheels) 2 wheels came one rear wheel and the screw. The information stated frequently bought together showing only one rear wheel (cabinet roller). I ordered the roller assembly wheels and one cabinet wheel by accident and one screw. The frequently bought together should include 2 cabinet rollers (rear wheels). I had to order a second rear (cabinet roller) which came later. The original rear wheels were the same diameter as the front wheels approximately 50mm. The rear cabinet wheels that I received were approximately 43mm in diameter. I replaced the front wheels first and then had to wait for the second rear wheel. I replaced the rear wheels. The installation went well and the small wheels on the rear appeared to work just fine. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Socket Set
Ronald P Weaver , AL September 24, 2019 Broken wheels Followed your instructions. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Jose J Union , NJ July 25, 2019 Appliance: Model KITCHENAID Wheels. Very simple. Simply used a crowbar to lift it a little until I got the wheels in place and tighten. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Wrench Set
Bernie L Hopewell Junction , NY January 01, 2016 Frig needed wheels Quick and easy Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Chris M Harvest , AL August 04, 2015 Appliance: KitchenAid Refrigerator KSRS25QDAL00 Broken right front wheel Replaced with new part same as OEM. I really appreciated fact that I ordered the part on Thursday and it was delivered before noon on Friday. They had a nice video showing the repair also helped. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
William L Eau Claire , WI June 28, 2015 Appliance: Model ED5SHAXMT10 The front and rear rollers had become hard and brittle and small pieces would break off the edges when moving the refrigerator out to clean the coils Ordered replacement front and rear rollers. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Socket Set