How to Troubleshoot & Replace Whirlpool AP6987430 / W11457217 Door Switch

The Freezer has only one LED Module in the Freezer, at the top, in the back (OEM Part #WPW10515057). The Refrigerator has Two LED Modules, one on the Back Wall, near the center (Same Part Number). The other one is at the Top, on the ceiling, and in the front, near the door (OEM Part# WPW10515058). The Refrigerator lights were operating properly. Unplugged the Unit Frig / Freezer. I ordered the part for the Freezer. Removed the old part with a small flat-blade screw-driver and unplugged it. Plugged-in the new module. Pressed it back in the cabinet liner. Plugged-in the Unit (Frig /Freezer) Opened both doors on the Unit. Works perfectly! 

It became possible to find a new switch thus negating a need for a new freezer. The switch was ordered, the How-To video was viewed and allowed an easy placement of the new switch. two new light bulbs were installed and WOW I can see the whole freezer contents. Thank you. 

I changed the light and light switch. Working great! 

Replace the whole housing.. 

My light switch was missing only displaying the tip of the wire harness. I pried out the wire harness, then attached the light switch and it worked. 4 screws to access/remove the auger motor. Unclipped the wire harness, reattached the new motor including the face plate and it worked. 

Popped the old parts out with a screwdriver and put in the new ones. Worked 

I replaced the Dispenser Control Board. 

Replaced the light/alarm switch