How to Troubleshoot & Replace Whirlpool AP6013356 / WP8565314 Top

Ordered new top, bezel and bleach dispenser then disassembled the venture upper section of the machine and replaced the ruined parts. Washer looks and operates like new 

When the new part came in, it took a while to figure out how to take the older part out. You will need to label parts or take pictures like I did. It doesn't come with a manual so be ready. Other than that the new top fit perfectly and looks like a new washer again. 

Had to replace the whole top on the machine. Manufacturer should consider a different style container for the Bleach application. Bleach had attacked the metal and was causing separation of the enamel paint. I feel the Bleach compartment should come fully through on the neck area via a softer type polymer that is resistant to Bleach. Then a locking cap from the top side with a opening for the Bleach application to keep it in place. Existing containment has openings just below the underside of the top. When Bleach is added to the fill line or slightly above, the Bleach can attack the metal due to exposure. All openings on the Bleach container need to be eliminated. The rust had also migrated into the the lid hinge. Had to cut the old top to remove the hinge. 

Replaced lid, top and left hinge.